Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Gold Member 2006gmcdmax's Avatar
    Join Date
    Aug 2012
    Posts
    285
    Location
    Augusta, GA
    Tractor
    Many but mostly ford diesels or ihc or jds

    Default Ford 5000 injection pump?

    My ford 5000 had a Simms injection pump and on the fuel shut off arm on the side of the pump there's a excess fuel button does anyone know about this it also has a thermostart?

  2. #2
    Veteran Member sd455dan's Avatar
    Join Date
    Oct 2012
    Posts
    1,594
    Location
    North Idaho
    Tractor
    Rhino 554,Ford 3000, JD550G dozer Gilson MTD riding mowers

    Default Re: Ford 5000 injection pump?

    Yep- the 3000 simms equipped tractors also employ the excess fuel button, I've tried it for cold starts but it runs very rich and doesn't seem to be an advantage for cold starting like the thermo-start is...

  3. #3
    Gold Member 2006gmcdmax's Avatar
    Join Date
    Aug 2012
    Posts
    285
    Location
    Augusta, GA
    Tractor
    Many but mostly ford diesels or ihc or jds

    Default Re: Ford 5000 injection pump?

    So that's all the button is for is cold starts and mine you can push it in and pops right out is that normal

  4. #4
    Old Timer Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    51,751
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: Ford 5000 injection pump?

    yep.. for helping with cold start.. etc.
    souNdguy

    sent from my NOKIA LUMIA

  5. #5
    Gold Member 2006gmcdmax's Avatar
    Join Date
    Aug 2012
    Posts
    285
    Location
    Augusta, GA
    Tractor
    Many but mostly ford diesels or ihc or jds

    Default Re: Ford 5000 injection pump?

    Well sounds good then I'm rebuilding the motor now and I'm going to redo all that stuff too ford 5000 restore is the thread I just restored a 4000 a while back

  6. #6
    Veteran Member sd455dan's Avatar
    Join Date
    Oct 2012
    Posts
    1,594
    Location
    North Idaho
    Tractor
    Rhino 554,Ford 3000, JD550G dozer Gilson MTD riding mowers

    Default Re: Ford 5000 injection pump?

    Quote Originally Posted by 2006gmcdmax View Post
    So that's all the button is for is cold starts and mine you can push it in and pops right out is that normal
    Well iirc
    you advance the throttle to wide open.
    then depress the button (fuel shut of shaft) it stays in position
    reduce throttle to 1/2
    start the engine and the button pops out - and you reduce the throttle, before the engine over revs...

    I just checked mine and if you push the button in without the throttle opened up the button just pops back out so yours seems to be acting correctly... enjoy the rebuild and the 5000

  7. #7
    Gold Member 2006gmcdmax's Avatar
    Join Date
    Aug 2012
    Posts
    285
    Location
    Augusta, GA
    Tractor
    Many but mostly ford diesels or ihc or jds

    Default Re: Ford 5000 injection pump?

    Haha sounds good to me and I appreciate it it iv had buy all new pistons and connecting rods even the camshaft someone never changed the oil I don't think

  8. #8
    Veteran Member sd455dan's Avatar
    Join Date
    Oct 2012
    Posts
    1,594
    Location
    North Idaho
    Tractor
    Rhino 554,Ford 3000, JD550G dozer Gilson MTD riding mowers

    Default Re: Ford 5000 injection pump?

    Quote Originally Posted by 2006gmcdmax View Post
    Haha sounds good to me and I appreciate it it iv had buy all new pistons and connecting rods even the camshaft someone never changed the oil I don't think
    Why would you have to buy new rods?? I know sometimes the big end needs re-sized but ALL connecting rods replaced??


    OH wow- did they spin the bearings in the seats ?? ruining the rods and caps....If so OUCH

  9. #9
    New Member
    Join Date
    Jun 2014
    Posts
    1
    Location
    SUMTER,S.C.
    Tractor
    FORD 5000

    Default Re: Ford 5000 injection pump?

    mY FORD 5000 TRACTOR SAT FOR A YEAR OR TWO WHEN i GOT IT STARTED IT REVS WIDE OPEN AND WONT THROTTLE DOWN IWAS TOLD YTHAT THE GOVERNOR IS STUCK HOW DO I REMEDY THAT. i TRIED OILING THE PUMP WITH MARVEL MYSTERY OIL AND PENETRATING OIL NOTHING SEEMS TO BE WORKING I NEED TO PLANT AND CANT. JERRY IN SC. CAN ANYONE HELP/?

  10. #10
    Veteran Member banjodunn's Avatar
    Join Date
    Jun 2008
    Posts
    1,386
    Location
    Ararat Vic Aus

    Default Re: Ford 5000 injection pump?

    G'day Jerry and First off need to know which pump it has on it ( a pic would be good) and then we go from there trying to help you.



    Jon

Page 1 of 2 12 LastLast

Similar Threads

  1. ford 1600 injection pump
    By cummin95 in forum Parts/Repairs
    Replies: 5
    Last Post: 12-16-2015, 12:39 PM
  2. Ford 3600 CAV injection pump
    By jltrent in forum New Holland Owning/Operating
    Replies: 22
    Last Post: 08-27-2014, 02:53 PM
  3. ford 6610 injection pump/timing issues
    By vanmedic in forum New Holland Owning/Operating
    Replies: 2
    Last Post: 06-27-2012, 12:13 PM
  4. Oil & Fuel Ford 1710 Fuel Injection Pump Woes
    By jbear in forum New Holland Owning/Operating
    Replies: 10
    Last Post: 11-16-2009, 09:21 AM
  5. Ford 1710 Fuel Injection Pump Woes
    By jbear in forum Parts/Repairs
    Replies: 8
    Last Post: 07-01-2006, 03:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.