Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1

    Default ford 4610

    Hi my ford 4610 has trouble starting off in gears higher than low one i adjusted the biting point on the clutch but it didnt do anything any ideas?

    -forumrunner_20140404_203724-png

  2. #2
    Veteran Member Jerry/MT's Avatar
    Join Date
    Feb 2008
    Posts
    2,089
    Location
    Western Montana
    Tractor
    New Holland TD95D, Ford 4610 & Ferguson TO-30

    Default Re: ford 4610

    Can you be more specific with describing your problem? Does the engine die, does the tractor shudder..... I flunked Mind Reading 101-ask my wife!

  3. #3

    Default

    Well the engine stays running but goin on flat ground it takes a lot of revs to get rolling as if the handbrake was on(but i know its not stuck on)

  4. #4
    Veteran Member Jerry/MT's Avatar
    Join Date
    Feb 2008
    Posts
    2,089
    Location
    Western Montana
    Tractor
    New Holland TD95D, Ford 4610 & Ferguson TO-30

    Default Re: ford 4610

    What rpm are you starting out with? Is the clutch slipping? Do you smell anything like a burned clutch? Any sign of oil dripping from the bell housing? How do you know the brakes are not stuck?

  5. #5

    Default

    Idleing rpm but to get moving needs high rpm.no smell or oil.i know the brakes arent stuck on as it acts normal in lowest gear.

  6. #6
    Veteran Member Jerry/MT's Avatar
    Join Date
    Feb 2008
    Posts
    2,089
    Location
    Western Montana
    Tractor
    New Holland TD95D, Ford 4610 & Ferguson TO-30

    Default Re: ford 4610

    What are you talking about regarding "...high rpm to get moving..."? Idle is about 700-800 rpm So what does it take to get you moving? max rpm is ~ 2200rpm so you have between say 800 to 2200 rmp working range.

  7. #7
    Platinum Member sawtooth's Avatar
    Join Date
    Sep 2007
    Posts
    597

    Default

    What transmission do you have? Shuttle or standard 8x2? Sent from my iPhone using TractorByNet
    Last edited by sawtooth; 04-14-2014 at 07:45 PM.

  8. #8

    Default

    Standard but its 4 gears a range(hi,lo,reverse)

  9. #9
    Platinum Member sawtooth's Avatar
    Join Date
    Sep 2007
    Posts
    597

    Default

    Quote Originally Posted by tractorboy3011 View Post
    Standard but its 4 gears a range(hi,lo,reverse)
    8 forward and 2 reverse total correct? Also do all gears other than 1st slip or is it just certain gears?


    Sent from my iPhone using TractorByNet

  10. #10

    Default

    8 forward four reverse and it only starts moving right in lowest gear.could it be the clutch?

Page 1 of 2 12 LastLast

Similar Threads

  1. Ford 4610 (c1987)
    By northdevonfarmer in forum Parts/Repairs
    Replies: 4
    Last Post: 01-20-2013, 05:46 AM
  2. Ford 4610 S/N Conundrum
    By wjb-49 in forum New Holland Owning/Operating
    Replies: 7
    Last Post: 06-30-2012, 07:38 PM
  3. 4610 su ford wiring
    By peatley in forum New Holland Owning/Operating
    Replies: 7
    Last Post: 06-02-2012, 02:36 AM
  4. THP on Ford 4610
    By awellc in forum Hydraulics
    Replies: 0
    Last Post: 05-30-2012, 03:23 AM
  5. FORD 4610 PTO
    By challengr in forum New Holland Ag Tractors
    Replies: 3
    Last Post: 01-13-2011, 05:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.