Results 1 to 8 of 8
  1. #1
    Platinum Member
    Join Date
    Jan 2011
    Posts
    565
    Location
    Westmoreland County PA
    Tractor
    Fords

    Default Ford 860 PTO Shaft Bushing

    I just spent an hour searching the net looking for the inner PTO shaft busing for this tractor. Can anyone point me in the right direction?

    This is the inner bushing that that is pressed into the rear axle housing by the double lip seal separating the hydraulic compartment from the rear end. All I can find is the sleeve that presses onto the shaft itself where the outer seal rides.

  2. #2
    Platinum Member
    Join Date
    Jan 2012
    Posts
    516
    Location
    California
    Tractor
    Ford 7710, Ford 550, Ford 1910, Ford 4430, KD Forklift, Ford LGT17H, New Holland L255 Skidsteer

    Default

    I would go with #3, NAA798A in the illustration, found in the NH online parts book for 860, 1 1/8" PTO section.


    -forumrunner_20140501_072010-png

  3. #3
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    49,272
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: Ford 860 PTO Shaft Bushing

    Quote Originally Posted by TractorTech View Post
    I would go with #3, NAA798A in the illustration, found in the NH online parts book for 860, 1 1/8" PTO section.


    -forumrunner_20140501_072010-png
    he's not looking for any part that fits the bearing carrier assy.....
    souNdguy

    sent from my NOKIA LUMIA

  4. #4
    Platinum Member
    Join Date
    Jan 2011
    Posts
    565
    Location
    Westmoreland County PA
    Tractor
    Fords

    Default Re: Ford 860 PTO Shaft Bushing

    Thanks guys. It was #NAA798A. I was able to get it aftermarket from Yesterdays Tractors. I spent the day today pulling and pressing bearings and races for the transmission on my 860. This thrust bushing is on the list for tomorrow.

    Last year the tractor jumped out of gear going down hill with a baler and a loaded wagon with my wife and brother in law on the wagon. That is when I decided it was time to rebuild the transmission. With luck, I'll have it ready to go before first cutting this year.

  5. #5
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    49,272
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: Ford 860 PTO Shaft Bushing

    so you WERE looking for the wear bushing?
    souNdguy

    sent from my NOKIA LUMIA

  6. #6
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    49,272
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: Ford 860 PTO Shaft Bushing

    Thrust bushing, board won't let me edit....
    souNdguy

    sent from my NOKIA LUMIA

  7. #7
    Platinum Member
    Join Date
    Jan 2011
    Posts
    565
    Location
    Westmoreland County PA
    Tractor
    Fords

    Default Re: Ford 860 PTO Shaft Bushing

    Yes, it was the thrust bushing. Thank you, and sorry if I gave a bad description.

    One thing I noticed about the replacement bushing is that it doesn't have oil retention holes or even a spiral. The OEM bushing is definitely better made, but it costs more than 2x.

  8. #8
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    49,272
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: Ford 860 PTO Shaft Bushing

    as with many things in life. stuff that was made original in our industrial glory days is likely better than today.. and you get what you pay for.

    Still. as much life as the 1st one gave you.. the 2nd one will likley make it a good ways too.
    souNdguy

    sent from my NOKIA LUMIA

Similar Threads

  1. ford 4000 pto shaft
    By moxy man in forum New Holland Ag Tractors
    Replies: 1
    Last Post: 05-18-2015, 10:42 PM
  2. problems with the pto shaft on ford 5610
    By Dcartwright in forum New Holland Ag Tractors
    Replies: 6
    Last Post: 09-02-2011, 03:58 PM
  3. Installing ford 4400 pto shaft.
    By paintma1 in forum Parts/Repairs
    Replies: 1
    Last Post: 08-06-2011, 10:42 PM
  4. PTO Input shaft broke Ford 3000
    By Clodbuster in forum Parts/Repairs
    Replies: 10
    Last Post: 12-17-2010, 05:01 PM
  5. Replies: 14
    Last Post: 09-06-2009, 06:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.