I have a T4.75 Powerstar hooked up with a New Idea 4845? round baler with monitor. I have the baler monitor and a backup camera with video monitor hooked up to the switched side of the AMP plug. Hadn't had any issues with the camera and video monitor operating at all. Started baling yesterday and was blowing the F38=20A fuse; multiple times. Turned off the video monitor and only blew one fuse today. The baler uses electricity to operating the twine arms when tieing. It does not blow the fuse when its tieing either. You can be just riding through the field and a fuse will blow.
According to the manual this is a 30A plug, why does it have 20A fuse and relay? The bale monitor has a inline 25A fuse on its power cable. Am i expecting too much from this plug? Should I do a dedicated feed elsewhere for this bale monitor? Prior this same baler and monitor were hooked up to another tractor; directly to battery with no ill effect. Any thoughts?
Thanks
According to the manual this is a 30A plug, why does it have 20A fuse and relay? The bale monitor has a inline 25A fuse on its power cable. Am i expecting too much from this plug? Should I do a dedicated feed elsewhere for this bale monitor? Prior this same baler and monitor were hooked up to another tractor; directly to battery with no ill effect. Any thoughts?
Thanks