mahlers
Gold Member
I'm sure this is an easy one, but I couldn't find anything in my owners manual that points me in the right direction - so obviously I come back to TBN.
I just changed out my hydraulic fluid and all the filters on my TN70S, and now I have no hydraulics. I drained fluid from all the places the manual told me (from the main resevoir, from under the 3-PH arms, and from the 4WD housing), and filled up the filter as much as I could before reinstalling it. I'm sure I need to bleed the system - is there a bleed screw someplace on the hydraulic pump? What's the proper procedure for bleeding the air out?
Thanks in advance for any help!
Martin
I just changed out my hydraulic fluid and all the filters on my TN70S, and now I have no hydraulics. I drained fluid from all the places the manual told me (from the main resevoir, from under the 3-PH arms, and from the 4WD housing), and filled up the filter as much as I could before reinstalling it. I'm sure I need to bleed the system - is there a bleed screw someplace on the hydraulic pump? What's the proper procedure for bleeding the air out?
Thanks in advance for any help!
Martin