Ford powerstar 8340 error codes

Ndechu · 11-01-2009, 01:45 AM

Hi the hydrolic system has failed am getting error code 14 when i start the tractor then code 66 comes on when i try to lift the hydrolic system .Help with the code

have no manual for the same.

D7E · 11-04-2009, 11:00 PM

I forget the meaning but i remember error code 66 popping up all the time if you shifted gears irratically or shifted to reverse while travelling forewards too fast before the system was ready and things of that nature...I cant remember...I'l get my old books out..?

D7E · 11-05-2009, 08:13 PM

Apparently 14 is electrical like a short..?

D7E · 11-08-2009, 01:40 AM

OK done my home work..14 is when error codes reoccur in successsion like bad earth affecting more than one circuit or right hand sensing pin circuit failure.?
Only thing i can get for "66" is hyd valve raise solenoid failed or short circuit..?

11-01-2009, 01:45 AM	#1 (permalink)
Ndechu New Member Join Date: Sep 2009 Posts: 3	Ford powerstar 8340 error codes Hi the hydrolic system has failed am getting error code 14 when i start the tractor then code 66 comes on when i try to lift the hydrolic system .Help with the code have no manual for the same.

11-04-2009, 11:00 PM	#2 (permalink)
D7E Platinum Member Join Date: May 2006 Location: Manitoba canada Posts: 627	Re: Ford powerstar 8340 error codes I forget the meaning but i remember error code 66 popping up all the time if you shifted gears irratically or shifted to reverse while travelling forewards too fast before the system was ready and things of that nature...I cant remember...I'l get my old books out..? __________________ " IF YOU'RE GONNA HAVE ONE ....HAVE A BIGGUN"

11-05-2009, 08:13 PM	#3 (permalink)
D7E Platinum Member Join Date: May 2006 Location: Manitoba canada Posts: 627	Re: Ford powerstar 8340 error codes Apparently 14 is electrical like a short..? __________________ " IF YOU'RE GONNA HAVE ONE ....HAVE A BIGGUN" Last edited by D7E; 11-08-2009 at 01:29 AM.

11-08-2009, 01:40 AM	#4 (permalink)
D7E Platinum Member Join Date: May 2006 Location: Manitoba canada Posts: 627	Re: Ford powerstar 8340 error codes OK done my home work..14 is when error codes reoccur in successsion like bad earth affecting more than one circuit or right hand sensing pin circuit failure.? Only thing i can get for "66" is hyd valve raise solenoid failed or short circuit..? __________________ " IF YOU'RE GONNA HAVE ONE ....HAVE A BIGGUN"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode