Results 1 to 2 of 2
  1. #1
    New Member
    Join Date
    Aug 2008
    LA - Lower Alabama
    New Holland TC35D

    Default 250TL

    Looking for anyone with a 250TL loader. I just got mine and love it but want to make sure I have it attached correctly. When looking at the tractor from the front the left side cam pin is in the whole closest to the back of the tractor and the right side cam pin is in the whole closest to the front of the tractor. Is that right or have I messed something up?



  2. #2
    Gold Member Jimmy Joe's Avatar
    Join Date
    Aug 2008
    Medford Wisconsin

    Default Re: 250TL

    It doesn't matter which hole the pin is in as long as there is no slop or rattle in the pin. If you look on the cam lever there are like four bolt holes to adjust as the cam wears just remove the bolt and move to a different hole to adjust. When you put the loader on push the cam lever til the pin is tight then put in the lock pin. If you cant get it tight move the bolt in the cam lever to a different hole.

Similar Threads

  1. New Boomer 3045 w/Cab, 250TL loader and mid mount mower
    By holtzacres in forum New Holland Buying/Pricing
    Replies: 3
    Last Post: 09-08-2009, 05:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2017 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.