I'm a newbie, so if I'm in the wrong place just tell me where to post... and all help is appreciated!
Ford 601 workmaster,the lift wouldn't raise at all, checked fluid, someone poured diesel fuel in there, drained it all out, put new hydraulic fluid in her... 134d i think.. pulled the allen bolt plug off the pump and poured some in there, started her up, bled the pump at the Allen bolt hole, lift now raises, but it's a little jerky and a little slow. when you raise the handle all the way up the lift will raise a grader blade, but not all the way up only around half way, with nothing on the 3pt hitch, you can raise the handle up and the lift will raise almost all the way up, then you can push down on the handle about 1 or 2 inches and raise it up again and the lift will fully extend but only without weight. So... any Clues where to look now.
Ford 601 workmaster,the lift wouldn't raise at all, checked fluid, someone poured diesel fuel in there, drained it all out, put new hydraulic fluid in her... 134d i think.. pulled the allen bolt plug off the pump and poured some in there, started her up, bled the pump at the Allen bolt hole, lift now raises, but it's a little jerky and a little slow. when you raise the handle all the way up the lift will raise a grader blade, but not all the way up only around half way, with nothing on the 3pt hitch, you can raise the handle up and the lift will raise almost all the way up, then you can push down on the handle about 1 or 2 inches and raise it up again and the lift will fully extend but only without weight. So... any Clues where to look now.