valve clearance on Shibaura 2 cylinder diesel

[ziptiekid]

I am reinstalling the repaired head on our Ford 1700, it has a Shibaura deisel (2 cylinder). I need to find out the valve clearance, if you need more info on the motor or what happened you can go to the thread labled "Ford 1700 building pressure in radiator". Thx....Lee

[Jbrink64]

Intake and exhaust are the same. .012" (.3mm)

[JC-jetro]

I am reinstalling the repaired head on our Ford 1700, it has a Shibaura deisel (2 cylinder). I need to find out the valve clearance, if you need more info on the motor or what happened you can go to the thread labled "Ford 1700 building pressure in radiator". Thx....Lee

Lee,
below you'll find the info. I have checked it with cold engine and it was right at the spec 0.3 mm. Have not checked it with engine runnig .. too much mess.

JC,

[ziptiekid]

Thanks alot guy's..I appreciate it.