oldford1700
New member
- Joined
- Sep 20, 2011
- Messages
- 12
- Tractor
- Ford 1700
Haven't used the 3 point in about 6 weeks and when I went to put on a sprayer I find I have no function on the hydraulics. The gauge installed by the up down speed control dial thing shows 0. I can manually pull the arms up and down with no resistance. Fluid looks fine and is up to level.
The tractor is running fine otherwise.
My searches didn't turn up any troubleshooting sequence for hydraulics on this model so if someone could point me I would appreciate it.
It has been cold for AZ, (20s) but I let it run a good long while to warm up. And 20s isn't really cold by most standards.
Thanks in advance.
The tractor is running fine otherwise.
My searches didn't turn up any troubleshooting sequence for hydraulics on this model so if someone could point me I would appreciate it.
It has been cold for AZ, (20s) but I let it run a good long while to warm up. And 20s isn't really cold by most standards.
Thanks in advance.