Results 1 to 4 of 4
  1. #1
    Gold Member
    Join Date
    Jul 2004
    Posts
    301
    Location
    Cartersville (NW) Georgia
    Tractor
    John Deere 1025r TLB

    Default TZ25DA problem

    Picked up a TZ25DA today and somehow missed the output shaft seal leaking. It is the shaft that drives the front axle and the seal's PN is 84400823.

    Can this seal be pryed out and then a new one be driven back in without any issue?

    Thanks for the help.
    '13 JD 1025r TLB
    60D MMM w/ electric over hydraulic independent lift
    Custom Seat Springs (no more bottoming out)
    Single Point Quick Disconnect
    180* Thermostat
    Artillian Forks (42")
    Ken's Bolt On Hooks
    Omni Transformer

  2. #2
    Bronze Member mkow1969's Avatar
    Join Date
    Dec 2011
    Posts
    60
    Location
    Newfane, NY
    Tractor
    New Holland T1110

    Default Re: TZ25DA problem

    Seen this post too. Hard to say without calling a dealer. My friend has the same tractor you have and the seal was leaking for the front pto shaft. He had the dealer replace it so I don't know what they did. I don't think it was that complicated though. Next time I see him I'll ask.

  3. #3
    Gold Member
    Join Date
    Jul 2004
    Posts
    301
    Location
    Cartersville (NW) Georgia
    Tractor
    John Deere 1025r TLB

    Default Re: TZ25DA problem

    I believe my local dealer is rather lacking and not sure I will be asking them much of anything. Looking at the Messicks sites I believe it will pry out and press in without issue. But to be sure I have ordered a factory service manual.
    '13 JD 1025r TLB
    60D MMM w/ electric over hydraulic independent lift
    Custom Seat Springs (no more bottoming out)
    Single Point Quick Disconnect
    180* Thermostat
    Artillian Forks (42")
    Ken's Bolt On Hooks
    Omni Transformer

  4. #4
    Gold Member
    Join Date
    Jul 2004
    Posts
    301
    Location
    Cartersville (NW) Georgia
    Tractor
    John Deere 1025r TLB

    Default Re: TZ25DA problem

    '13 JD 1025r TLB
    60D MMM w/ electric over hydraulic independent lift
    Custom Seat Springs (no more bottoming out)
    Single Point Quick Disconnect
    180* Thermostat
    Artillian Forks (42")
    Ken's Bolt On Hooks
    Omni Transformer

Similar Threads

  1. TZ25DA
    By engineer bill in forum New Holland Owning/Operating
    Replies: 11
    Last Post: 03-07-2013, 05:35 PM
  2. TZ25DA problem...help!
    By wny770 in forum New Holland Owning/Operating
    Replies: 8
    Last Post: 09-26-2009, 09:05 AM
  3. Seat for TZ25DA
    By 99SVT in forum New Holland Owning/Operating
    Replies: 1
    Last Post: 08-31-2009, 10:20 PM
  4. New TZ25DA
    By JagAlfaOwner in forum New Holland Owning/Operating
    Replies: 11
    Last Post: 07-18-2009, 08:55 AM
  5. Backhoe TZ25DA W/ Backhoe
    By Charlton John in forum New Holland Owning/Operating
    Replies: 5
    Last Post: 06-28-2008, 04:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.