4wd engagement

   / 4wd engagement #1  

arksdad

Bronze Member
Joined
Aug 14, 2009
Messages
56
Location
PA
Tractor
IH656 - NH T2310 - Country Clipper 60" ZTR
I have a T2310. What is the trick to getting it in and out of 4wd. It's a struggle either way
 
   / 4wd engagement #2  
If you have a loader, raise the front wheels off the ground and it goes in/out like greased lightnin'.:D
 
   / 4wd engagement
  • Thread Starter
#3  
Thanks Jinman, I'll give that a try!
 
   / 4wd engagement #4  
Otherwise, try driving straight ahead and bumping the throttle while applying pressure to the shift lever. The throttle bumping will momentary release pressure on the drive gears. Driving straight will assure no pressure from the differential.
 
   / 4wd engagement #5  
Otherwise, try driving straight ahead and bumping the throttle while applying pressure to the shift lever. The throttle bumping will momentary release pressure on the drive gears. Driving straight will assure no pressure from the differential.

Yup..
 
   / 4wd engagement #6  
Engage and disengage while moving straight. To disengage, 1st accelerate briefly full power - then let off quickly while simultaneously operating the lever.
larry
 
 
Top