4600 Reverse in 3rd gear position.

   / 4600 Reverse in 3rd gear position. #1  

petebert

Silver Member
Joined
Oct 12, 2011
Messages
210
Location
Outside of Ann Arbor
Tractor
...
If we think of the shifter as

A B C
D E

I'm getting reverse in D and E, also 1 low isn't any slower than 2 low.
 
   / 4600 Reverse in 3rd gear position. #2  
What transmission do you have.. Post the model I'd #.

Twin stick,right?
 
   / 4600 Reverse in 3rd gear position.
  • Thread Starter
#3  
Yes twin stick, which serial do you need? The transmission case is stamped D5-NN-7006 P

I think this is what you need more, looks like the model is CU212K, transmission is 8023C

Did some googling, it appears that this "4600" would be a 335 that somebody put a lot of effort of dressing up as a 4600. Also found the gear chart below, explains why what I thought was 2nd goes the slowest, although it's still a little too fast for ag purposes IMO, of course this isn't actually an ag tractor though. Any chance there's a way to slow it down? I like to have a 1 low that really crawls for working in tight spots.

forum_3904.jpg
 
Last edited:
   / 4600 Reverse in 3rd gear position. #4  
see.. that's exactly why i asked.

most people see a twin stick and assume an 8spd.

you have the 6x4

you are pretty much stuck with what you got.... slow it down? sure.. smaller wheels n tires. :) or a different machine...
 
   / 4600 Reverse in 3rd gear position. #5  
Also, the CU212K designates the 335 model which someone could have put in a 4600. The 4600 had more Hp. To see if it is a 4600 engine look at the S/N stamped on the top of the oil pan on the right side. K indicates the 201 engine like a 4600.
 
   / 4600 Reverse in 3rd gear position. #6  
201's are nice and throaty!
 
   / 4600 Reverse in 3rd gear position. #8  
Yup, like a 3600, etc
 
   / 4600 Reverse in 3rd gear position.
  • Thread Starter
#9  
   / 4600 Reverse in 3rd gear position. #10  
The transmission is in the 3600 or 335 transmission section, 6x4. Those stabilizers will work, but may need to do a little modification lift arm bolts.
 
 
Top