Results 1 to 3 of 3
  1. #1
    Bronze Member
    Join Date
    Mar 2002
    Posts
    60
    Location
    Tx
    Tractor
    NH TN75DA

    Default Transmission filter wrench for TN

    What kind of filter wrench have you found works best to take the filter out. The only kind that I have found that is big enough is the filter wrench with a strap on it. Any other ideas. It's a TN75DA Thanks in advance

  2. #2
    Platinum Member TNhobbyfarmer's Avatar
    Join Date
    Dec 2004
    Posts
    790
    Location
    Middle Tennessee
    Tractor
    Kubota 3430 4WD

    Default Re: Transmission filter wrench for TN

    I used a strap wrench on my TN75. That was the only kind I could fit on it because the FEL bracket was up very snug to the filter. It worked good in spite of the fact that the filters must be put on by gorillas at the factory. I've never figured why they see fit to put them on so tight.

  3. #3
    Super Member RickB's Avatar
    Join Date
    Sep 2000
    Posts
    7,986
    Location
    Eastern NY
    Tractor
    Case 885, Ford 4000

    Default Re: Transmission filter wrench for TN

    I use a pair of K-D Filter pliers. The largest size available fits all TN filters including the Power Shuttle canister.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.