Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    New Member
    Join Date
    Jul 2001
    Posts
    10
    Location
    Traverse City Michigan
    Tractor
    2001 New Holland TC40D; 1969 Ford 4000;

    Default TC40D Engine just stopped - Any help?

    All,

    My TC40D just stopped and now will not turn over. I checked the safety switch under the seat and it is fine, I even by-passed it to make sure. The PTO was running when the tractor stopped and the PTO light does not come on when the ignition is on. I also checked the ignition switch and it also appears fine.

    Thanks,

    Tim in Michigan

  2. #2
    Veteran Member IH3444's Avatar
    Join Date
    Jan 2004
    Posts
    1,722

    Default Re: TC40D Engine just stopped - Any help?

    Besure PTO lever is back in off position. Set parking brake. Check oil.

  3. #3
    New Member
    Join Date
    Jul 2001
    Posts
    10
    Location
    Traverse City Michigan
    Tractor
    2001 New Holland TC40D; 1969 Ford 4000;

    Default Re: TC40D Engine just stopped - Any help?

    PTO lever is in "dis-engage" position. Parking break is on. Oil was low, now it is right on the mark.

  4. #4
    Silver Member
    Join Date
    Jun 2006
    Posts
    109
    Location
    S.E. Michigan
    Tractor
    New Holland TC33DA

    Default Re: TC40D Engine just stopped - Any help?

    Did you check for a blown fuse. Just a thought.

  5. #5
    Platinum Member kozak's Avatar
    Join Date
    Feb 2004
    Posts
    613
    Location
    Forest, Ontario Canada
    Tractor
    New Holland TC35D c/w FEL, ACCO Allis 1614

    Default Re: TC40D Engine just stopped - Any help?

    markey02,

    fuel level, fuel filter plugged, fuel line plugged, main 40A fuse blown ??

    Vic
    NH TC35D SS, c/w FEL, Woods Rotary Cutter, Luck Now Snowblower & Universal Forks.
    AGCO Allis 1614 with MMM.

  6. #6
    Tractorganic
    Guest

    Default Re: TC40D Engine just stopped - Any help?

    Make sure your gear shift lever is really in Neutral and the parking brake is on.
    You say it stopped, what was happening just before it stopped?
    Is your 40D new? What condition is it in. Was it left out in the rain perhaps to freeze and thaw on a dealers lot?
    I thought I bought a new 40D 2 years ago; but it was severely compromised by having been left out and I've gone to a second dealer for warranty and repair work. Now it's out of warrantee (2 yrs.) and the problems are worse.

  7. #7
    New Member
    Join Date
    Jul 2001
    Posts
    10
    Location
    Traverse City Michigan
    Tractor
    2001 New Holland TC40D; 1969 Ford 4000;

    Default Re: TC40D Engine just stopped - Any help?

    Would you believe that it was a 7.5 amp fuse? She's running fine now.

    I was not sure where the fuse box was. After some tinkering (checking all the kill switches) I had the side pannel off and looked up under the dash. And wouldn't you know, I found the back side of fuse pannel. Took off the gage cluster and I found the fuse pannel. It would of been much easier had I look there first.

    Thanks all for your suggestions!

  8. #8
    Veteran Member
    Join Date
    Oct 2005
    Posts
    1,432
    Location
    N. E. Ohio
    Tractor
    tc- 29d

    Default Re: TC40D Engine just stopped - Any help?

    Was your PTO light on all the time?
    dqdave1; tc-29D; woods 7500 bh; 7308 fel, land pride tiller, land pride rake, gill pulverizer, 60"mmm. , bucket forks , MZ16H

  9. #9
    New Member
    Join Date
    Jul 2001
    Posts
    10
    Location
    Traverse City Michigan
    Tractor
    2001 New Holland TC40D; 1969 Ford 4000;

    Default Re: TC40D Engine just stopped - Any help?

    Nope, the PTO light was not on.

  10. #10
    Veteran Member mikim's Avatar
    Join Date
    Feb 2001
    Posts
    2,270
    Location
    Paige Texas
    Tractor
    NH TC45

    Default Re: TC40D Engine just stopped - Any help?

    replace it with a circuit breaker ... they may have to order it but it's in the parts book ....that one blows a lot ....
    Mike


Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.