Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25
  1. #21
    Member
    Join Date
    Aug 2010
    Posts
    36
    Location
    angleton texas
    Tractor
    john deere 990 & 5310 new holland tn 65

    Default Re: TN 65 wiring diagram?

    yes i have the power shuttle, i just ordered the cnh diagnostic tool, so when it comes in i can check the codes. just bought the tractor has 4500 hours on it.
    the seat switch is alfready bypassed but will check on it. thanks.

  2. #22
    Member
    Join Date
    Aug 2010
    Posts
    36
    Location
    angleton texas
    Tractor
    john deere 990 & 5310 new holland tn 65

    Default Re: TN 65 wiring diagram?

    I hooked up the diagnostic tool, bought it at e bay supposed to be new.
    whe i turn the ignition, it takes a couple of seconds and then the no communication display is showing on the tool.
    tried it several times, even with tractor running, not change.
    checked the wires back from diagnostic tool connecter to the computer, they all are good. anybody has any idea what this vould be?
    the tractor is rough in going froward, but smooth going back wards. i was trying to see if i could adjust this.
    just fixed my insrument cluster before hook up, this does not show any warning lights.
    do i need to look for a new computer?
    pete

  3. #23
    Super Member RickB's Avatar
    Join Date
    Sep 2000
    Posts
    7,590
    Location
    Eastern NY
    Tractor
    Case 885, Ford 4000

    Default Re: TN 65 wiring diagram?

    You probably just need to learn how to use the tool. Do you have the instruction manual? Are you pressing the HH button as you turn the tractor key on?
    We have too much gun control.
    What we need is more idiot control.

  4. #24
    Member
    Join Date
    Aug 2010
    Posts
    36
    Location
    angleton texas
    Tractor
    john deere 990 & 5310 new holland tn 65

    Default Re: TN 65 wiring diagram?

    thanks, RickB, was too anxious to hook everthing up and did not read the manual all the way.

  5. #25
    Member
    Join Date
    Aug 2010
    Posts
    36
    Location
    angleton texas
    Tractor
    john deere 990 & 5310 new holland tn 65

    Default Re: TN 65 wiring diagram?

    Well, RickB, as you mentioned I needed to get used tot he tool.
    I did the H1 as well as the H6, my clutch filling time forward was set at 40ms same as back wards, because the tractor is rough in going froward, but smooth going back wards. i was trying to see if i could adjust this by going up ( and down) all the way up to 150ms., no change.
    one question:
    because the book said after adjusting the timeing you have to put the Power shuttle control lever in forward, i put the gear shift in neutral to avoid moving the tractor, i assume this is ok? what other options do i have to adjust this, without taking the clutch out? pete

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.