Looking for Boomer specs....

montejw · 06-17-2007, 03:56 PM

New Holland's site is hard to navigate as the information is buried beneath the Product Counselor, or whatever it is. Looking for implement sizes and such, like how big a flail mower can each one use, etc. Or a generic site that has that sort of information compared to engine and PTO horsepower.

Thanks,
Monte

Soundguy · 06-18-2007, 10:05 AM

I doubt you will find implement sizes listed for each tractor. Instead.. figure hp, DB hp, or PTO hp.. then figure out your implemnt needs based on what the implement manufacturer reccomends for their equipment.

Soundguy

jbrumberg · 06-19-2007, 05:51 AM

montejw:

Some of NH's Sales & Marketing (hardcopy) literature contains information about what size attachments are compatible for their different tractors. Jay

daTeacha · 06-21-2007, 03:49 PM

You could also mine the Case literature since there is so much similarity between the two lines.

FULLPULL · 06-21-2007, 11:20 PM

Look in the products section there is implements listed and what tractors should pull them.There is only 10 or so listed.

jbrumberg · 06-22-2007, 05:38 AM

montejw:

I scanned a page from one of the Sales & Marketing brochures I have. Hopefully this will help to some degree. Jay

montejw · 06-22-2007, 10:10 AM

Quote:

Originally Posted by jbrumberg

montejw:

I scanned a page from one of the Sales & Marketing brochures I have. Hopefully this will help to some degree. Jay

Thanks, it does help a bit.

Monte

schmism · 06-25-2007, 12:23 PM

remember there is a frame size change between the TC33/34 and the TC35

06-17-2007, 03:56 PM	#1 (permalink)
montejw Gold Member Join Date: Jun 2006 Location: NW WA State Posts: 273	Looking for Boomer specs.... New Holland's site is hard to navigate as the information is buried beneath the Product Counselor, or whatever it is. Looking for implement sizes and such, like how big a flail mower can each one use, etc. Or a generic site that has that sort of information compared to engine and PTO horsepower. Thanks, Monte

06-18-2007, 10:05 AM	#2 (permalink)
Soundguy Super Star Member Join Date: Mar 2002 Location: Central florida Posts: 18,689	Re: Looking for Boomer specs.... I doubt you will find implement sizes listed for each tractor. Instead.. figure hp, DB hp, or PTO hp.. then figure out your implemnt needs based on what the implement manufacturer reccomends for their equipment. Soundguy

06-19-2007, 05:51 AM	#3 (permalink)
jbrumberg Veteran Member Join Date: Jan 2006 Location: Western MA Posts: 1,915	Re: Looking for Boomer specs.... montejw: Some of NH's Sales & Marketing (hardcopy) literature contains information about what size attachments are compatible for their different tractors. Jay __________________ NH TC29DA with 14LA and HD QA 60" bucket, weighted R-1's, FOPS, CCM M-160 (58") Tiller, Tebben MD 60" Rotary Cutter, Woods LR 108 (96") Landscape Rake, FEL cutting edge and tooth bar, Woods GB60 (60") Box Blade

06-21-2007, 03:49 PM	#4 (permalink)
daTeacha Veteran Member Join Date: Oct 2005 Location: Funk, Ohio Posts: 2,347	Re: Looking for Boomer specs.... You could also mine the Case literature since there is so much similarity between the two lines. __________________ Rich 300 hours on the DX29, 850 on the JD 240 and too many to count on the Cadet Funk, Ohio

06-21-2007, 11:20 PM	#5 (permalink)
FULLPULL Gold Member Join Date: Jan 2007 Location: Ky Posts: 345	Re: Looking for Boomer specs.... Look in the products section there is implements listed and what tractors should pull them.There is only 10 or so listed. __________________ TC55DA 270TL ,Harley rake,Grader box ect ect ect

06-25-2007, 12:23 PM	#8 (permalink)
schmism Veteran Member Join Date: Jul 2006 Location: 62014 IL (outside STL MO) Posts: 2,450	Re: Looking for Boomer specs.... remember there is a frame size change between the TC33/34 and the TC35 __________________ Steve - TC33D 4x4 FEL, dual rear remotes with toys

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode