Ford 4000 3 PT won't move - Page 2

Soundguy · 06-19-2008, 12:09 AM

Yeah.. you can shut the 3pt off if the asc is set wrong.

soundguy

PAB_OH · 06-24-2008, 10:45 PM

Hey guys, I still haven't made it down there. I'm heading out of town again for a couple of days but I'm off work all next week. I should be able to make it down there to check it out.

Thanks for the advice so far. Hopefully it's something easy.... I doubt it though.

Soundguy · 06-24-2008, 11:25 PM

Just keep us in the loop.

soundguy

PAB_OH · 07-15-2008, 06:10 PM

Still haven't made it down to his cabin yet. In fact I haven't seen much of him lately. I havent' forgot though....

Soundguy · 07-15-2008, 11:29 PM

Seems like now is the time for tractors to be down.

My normally trusty ford 5000 is down while I replac ethe vreg, and rebuild the genny..

soundguy

namvet69 · 07-21-2008, 11:44 PM

Quote:

Originally Posted by PAB_OH

Does anyone have a schematic for this machine or know where I can get one? He's a pretty good neighbor so I'm willing to get it on my own if need be.

Thanks for all the help so far guys.

Let me know if you still need it, I'll see if I can dig it up, I should have it down at the shop.

NV

PAB_OH · 07-29-2008, 10:47 PM

namvet, yes please! I have one last week of vacation at the end of the month and I'm going to try and make it down there. I haven't seen my neighbor much lately since he's haying and staying at his farm through the week and most weekends.

As far I know it's not fixed. Appreciate the offer!

namvet69 · 08-06-2008, 12:05 AM

Quote:

Originally Posted by PAB_OH

namvet, yes please! I have one last week of vacation at the end of the month and I'm going to try and make it down there. I haven't seen my neighbor much lately since he's haying and staying at his farm through the week and most weekends.

As far I know it's not fixed. Appreciate the offer!

Here is the schematic, there are about 7 pages total covering the hyd system, I'll UL another page and the pump and you can let me know what else you need.

namvet69 · 08-06-2008, 12:11 AM

Don't let the pic of the pressure releif valve mess with your mind like it did mine many years ago, it was taken from under the tractor looking up.

Had an old girlfriend in New Phily years ago.

NV

PAB_OH · 08-12-2008, 12:51 PM

Thanks for the schematics. I'll look them over tonight.

New Philly you say. I'm over that way a bit, now and then.

06-19-2008, 12:09 AM	#11 (permalink)
Soundguy Super Star Member Join Date: Mar 2002 Location: Central florida Posts: 18,174	Re: Ford 4000 3 PT won't move Yeah.. you can shut the 3pt off if the asc is set wrong. soundguy

06-24-2008, 10:45 PM	#12 (permalink)
PAB_OH Gold Member Join Date: Oct 2005 Location: Carroll County, Ohio Posts: 452	Re: Ford 4000 3 PT won't move Hey guys, I still haven't made it down there. I'm heading out of town again for a couple of days but I'm off work all next week. I should be able to make it down there to check it out. Thanks for the advice so far. Hopefully it's something easy.... I doubt it though. __________________ Kioti CK30 HST - KL130 FEL + Toothbar - 84" Rhino LR500 RB - Woods RD6000 - Ford PHD

06-24-2008, 11:25 PM	#13 (permalink)
Soundguy Super Star Member Join Date: Mar 2002 Location: Central florida Posts: 18,174	Re: Ford 4000 3 PT won't move Just keep us in the loop. soundguy

07-15-2008, 06:10 PM	#14 (permalink)
PAB_OH Gold Member Join Date: Oct 2005 Location: Carroll County, Ohio Posts: 452	Re: Ford 4000 3 PT won't move Still haven't made it down to his cabin yet. In fact I haven't seen much of him lately. I havent' forgot though.... __________________ Kioti CK30 HST - KL130 FEL + Toothbar - 84" Rhino LR500 RB - Woods RD6000 - Ford PHD

07-15-2008, 11:29 PM	#15 (permalink)
Soundguy Super Star Member Join Date: Mar 2002 Location: Central florida Posts: 18,174	Re: Ford 4000 3 PT won't move Seems like now is the time for tractors to be down. My normally trusty ford 5000 is down while I replac ethe vreg, and rebuild the genny.. soundguy

07-29-2008, 10:47 PM	#17 (permalink)
PAB_OH Gold Member Join Date: Oct 2005 Location: Carroll County, Ohio Posts: 452	Re: Ford 4000 3 PT won't move namvet, yes please! I have one last week of vacation at the end of the month and I'm going to try and make it down there. I haven't seen my neighbor much lately since he's haying and staying at his farm through the week and most weekends. As far I know it's not fixed. Appreciate the offer! __________________ Kioti CK30 HST - KL130 FEL + Toothbar - 84" Rhino LR500 RB - Woods RD6000 - Ford PHD

08-06-2008, 12:11 AM	#19 (permalink)
namvet69 Member Join Date: Jun 2008 Posts: 25	Re: Ford 4000 3 PT won't move Don't let the pic of the pressure releif valve mess with your mind like it did mine many years ago, it was taken from under the tractor looking up. Had an old girlfriend in New Phily years ago. NV

08-12-2008, 12:51 PM	#20 (permalink)
PAB_OH Gold Member Join Date: Oct 2005 Location: Carroll County, Ohio Posts: 452	Re: Ford 4000 3 PT won't move Thanks for the schematics. I'll look them over tonight. New Philly you say. I'm over that way a bit, now and then. __________________ Kioti CK30 HST - KL130 FEL + Toothbar - 84" Rhino LR500 RB - Woods RD6000 - Ford PHD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode