|
|
|
 |
|
 |
|
||||||||||||||||||||||
|
||||||||||||||||||||||
06-17-2008, 08:21 PM
|
#1 (permalink) |
|
Bronze Member
Join Date: May 2003
Location: Mobile, Alabama
Posts: 59
|
TC21 casualty
I had a major casualty this morning on my TC21. I was clearing my fence line and I stopped to cut some brush with my chain saw and noticed a puddle of oil. I went back and checked the tractor to find a major leak coming from the housing just forward of the mid-mount pto. I knew it wasn't good at that point and had my neighbor help pull it out of the pasture. After cleaning it up a bit, I found a major crack in the housing. All fluid had drained in about a half hour. The dealer came and picked it up this afternoon, now just waiting for the call to see how it will all work out. Hopefully will be warranty repair.
__________________
New Holland TC21DA 12LA Loader with 54" bucket with Markham Toothbar Land Pride FDR-1660 Tufline TB-048 Box blade |
|
|
|
06-17-2008, 10:32 PM
|
#2 (permalink) |
|
Platinum Member
Join Date: Oct 2005
Location: N. E. Ohio
Posts: 938
|
Re: TC21 casualty
From the photo, it may have been leaking for a while.
__________________
dqdave1; tc-29D; woods 7500 bh; 7308 fel, land pride tiller, land pride rake, gill pulverizer, 60"mmm. , bucket forks , MZ16H |
|
|
|
|
06-17-2008, 10:40 PM
|
#3 (permalink) |
|
Bronze Member
Join Date: May 2003
Location: Mobile, Alabama
Posts: 59
|
Re: TC21 casualty
No, it had not leaked at all before. It kind of spewed everywhere after this. I wiped the crack area down just before the photo. Also, I forgot to post earlier 227 hours on the clock.
__________________
New Holland TC21DA 12LA Loader with 54" bucket with Markham Toothbar Land Pride FDR-1660 Tufline TB-048 Box blade |
|
|
|
|
06-18-2008, 12:14 AM
|
#4 (permalink) |
|
Platinum Member
Join Date: Oct 2005
Location: N. E. Ohio
Posts: 938
|
Re: TC21 casualty
Good luck; I would think it it is a warranty issue. Hope your dealer is going to work with you.
__________________
dqdave1; tc-29D; woods 7500 bh; 7308 fel, land pride tiller, land pride rake, gill pulverizer, 60"mmm. , bucket forks , MZ16H |
|
|
|
|
06-18-2008, 09:07 AM
|
#5 (permalink) | |
|
Veteran Member
Join Date: Jan 2006
Location: Western MA
Posts: 1,876
|
Re: TC21 casualty
Quote:
__________________
NH TC29DA with 14LA and HD QA 60" bucket, weighted R-1's, FOPS, CCM M-160 (58") Tiller, Tebben MD 60" Rotary Cutter, Woods LR 108 (96") Landscape Rake, FEL cutting edge and tooth bar, Woods GB60 (60") Box Blade |
|
|
|
|
|
06-18-2008, 09:33 AM
|
#7 (permalink) |
|
Bronze Member
Join Date: May 2003
Location: Mobile, Alabama
Posts: 59
|
Re: TC21 casualty
It is a 2005 model. I bought it new in August of 2006.
__________________
New Holland TC21DA 12LA Loader with 54" bucket with Markham Toothbar Land Pride FDR-1660 Tufline TB-048 Box blade |
|
|
|
|
06-18-2008, 12:12 PM
|
#9 (permalink) |
|
Bronze Member
Join Date: May 2003
Location: Mobile, Alabama
Posts: 59
|
Re: TC21 casualty
Pulling brush that I was clearing. Anything over 3 inches was cut by saw and pulled out with the loader. Smaller stuff was popped out with loader and toothbar.
__________________
New Holland TC21DA 12LA Loader with 54" bucket with Markham Toothbar Land Pride FDR-1660 Tufline TB-048 Box blade |
|
|
|
 |
||
| Thread Tools | |
| Display Modes | |
|
|
|
||||||||||||||||||||||
| About TractorByNet.com | Terms of Service | Advertise | © 2008 TractorByNet.com |
Linear Mode
