Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Veteran Member
    Join Date
    Oct 2005
    Posts
    1,432
    Location
    N. E. Ohio
    Tractor
    tc- 29d

    Default #00 gear grease

    What is and where do I find #00 gear grease
    dqdave1; tc-29D; woods 7500 bh; 7308 fel, land pride tiller, land pride rake, gill pulverizer, 60"mmm. , bucket forks , MZ16H

  2. #2
    Elite Member DieselPower's Avatar
    Join Date
    Sep 2006
    Posts
    2,761
    Location
    Fairfield, PA
    Tractor
    JD 3020, JD 4230, JD 7410, JD 2440, MF 750, NH LS170

    Default Re: #00 gear grease

    NGLI #00 is a viscosity. The standard stuff you buy to do your tractor and vehicles is normally NGLI #2. #00 is what is considered a semi-fluid grease (very thin) and is often used as a gear box lubricant in place of gear oil.

    Most lubricant manufacturers make a NGLI #00 grease. What are you using it for? Two excellent NGLI #00 greases are TRC's 880 Crown and Chassis grease and Millennium 2200 grease. The Millennium 2200 also has Moly and Graphite added as a solid film lubricant additive. For gear cases I recomend the Millennium 2200.

  3. #3
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    48,591
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: #00 gear grease

    Of course DP is right on.

    Depending on your application.. JD's cornhead grease ( used for the neames stated purpose ) may suit you.

    Soundguy

  4. #4
    Veteran Member
    Join Date
    Oct 2005
    Posts
    1,432
    Location
    N. E. Ohio
    Tractor
    tc- 29d

    Default Re: #00 gear grease

    It is called for in the chain drive gear box of a Harley Power Rake.
    dqdave1; tc-29D; woods 7500 bh; 7308 fel, land pride tiller, land pride rake, gill pulverizer, 60"mmm. , bucket forks , MZ16H

  5. #5
    Elite Member DieselPower's Avatar
    Join Date
    Sep 2006
    Posts
    2,761
    Location
    Fairfield, PA
    Tractor
    JD 3020, JD 4230, JD 7410, JD 2440, MF 750, NH LS170

    Default Re: #00 gear grease

    The Millennium 2200 would be perfect for a chain drive gear box application. The chain would greatly benefit from the Moly and Graphite lubricating properties.

  6. #6
    Veteran Member
    Join Date
    Oct 2005
    Posts
    1,432
    Location
    N. E. Ohio
    Tractor
    tc- 29d

    Default Re: #00 gear grease

    Thanks for your expert advise; I knew you would answer me with information.
    Next question; where to buy it.
    dqdave1; tc-29D; woods 7500 bh; 7308 fel, land pride tiller, land pride rake, gill pulverizer, 60"mmm. , bucket forks , MZ16H

  7. #7
    Elite Member DieselPower's Avatar
    Join Date
    Sep 2006
    Posts
    2,761
    Location
    Fairfield, PA
    Tractor
    JD 3020, JD 4230, JD 7410, JD 2440, MF 750, NH LS170

    Default Re: #00 gear grease

    Click the link in the above post, the site is mine so the contact info on it is directly to me.

  8. #8
    New Member
    Join Date
    Jun 2011
    Posts
    1
    Tractor
    Ford 8N

    Default Re: #00 gear grease

    Hi,

    Found a good resource for all kinds of stuff tractor folks might need. Check out Applied.com. I can get a Qt of Lubriplate Mag-00 Series Low Temperature Grease for about ~$20 or a gallon for ~$60. Applied tech has 400 locations all around the country and you can mail order on the net too.

    Been searching for EP-00 or NLGI 00 semi-liquid grease myself and yeah it's a pain. This stuff is made for leaky gear boxes or pumped central lubrication systems for heavy equipment and ones that are gonna leak due to cheap / poor design. I've got an earthquake rear tine tiller that specified "Mystic 00 transmission fluid PN 1690"

    Another problem I've encountered is packaging size. I really don't need a 55gl drum of goo costing more than the equipment I'm repairing. I found my fix and offering it up to help you save some time and equipment. This stuff should be great for weepy PTO gear boxes and Applied may be a good source for bearings, bushings, and seals to fix'em too.

    Hope this helps

  9. #9
    Bronze Member
    Join Date
    May 2011
    Posts
    94
    Location
    Liberty Hill, TX.
    Tractor
    no

    Default Re: #00 gear grease

    Schaeffer greases perform at least as well as Lubriplate and are less expensive. You can get the #00 grease in cases of tubes. Go online to schaefferoil.com. click buy now, choose high performance grease. the 0274 comes in a 30 tube case for $158. coupon code 2762 will get you a 10% discount. Or you can find a Scheaffer guy in your area. Its worth the effort.

  10. #10
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    48,591
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: #00 gear grease

    jd cornhead grease is 0# and ep.. can be had at JD parts counters by the tube ( or perhaps by the case in some areas ).

    soundguy

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.