Best synthetic grease in a cartridge - Page 2

frank_miller · 06-17-2008, 06:42 PM

disagree bigtime. I can use dino oil in my car and then synthetic will outperformce in NOX/OXD, higher TBN and lower wear #'s. Cold or Hot. This is what UOA'S show.

Problem I see is 99% of people do not test oil and have no clue. You could not GIVE me a dino oil..Sorry, been there done that.Keep your dino oil/greases people.

snoboy · 06-18-2008, 04:11 PM

IMHO shaeffer's #238 has probably performed the best in my backhoe. I currenty use Cenex Maxtron EP synthetic blend (lithium complex) because the price was right for a case but the aluminum complex Shaeffers seemed to give most me the most hours before going limp. I've just been too lazy to locate/ buy a case. I know the rest of their products like their Supreme line of diesel engine oils are absolutely second to none.

Schaeffer Lubricants | Supreme Moly Grease

06-17-2008, 06:42 PM	#11 (permalink)
frank_miller Banned Join Date: Nov 2006 Posts: 179	Re: Best synthetic grease in a cartridge disagree bigtime. I can use dino oil in my car and then synthetic will outperformce in NOX/OXD, higher TBN and lower wear #'s. Cold or Hot. This is what UOA'S show. Problem I see is 99% of people do not test oil and have no clue. You could not GIVE me a dino oil..Sorry, been there done that.Keep your dino oil/greases people.

06-18-2008, 04:11 PM	#12 (permalink)
snoboy Silver Member Join Date: Apr 2004 Location: Washington Posts: 125	Re: Best synthetic grease in a cartridge IMHO shaeffer's #238 has probably performed the best in my backhoe. I currenty use Cenex Maxtron EP synthetic blend (lithium complex) because the price was right for a case but the aluminum complex Shaeffers seemed to give most me the most hours before going limp. I've just been too lazy to locate/ buy a case. I know the rest of their products like their Supreme line of diesel engine oils are absolutely second to none. Schaeffer Lubricants \| Supreme Moly Grease __________________ To operate: 2004 Branson 4020 TLB w/thumb -Kodiak 72" HD box scraper -Lorenz 630 78" snow blower -Tytan 6" PTO chipper -Modern 60" rotary cutter -Rankin 2000 clamp-on forks To repair: -Millermatic 210 MIG w/ spoolgun -Thermal Dynamics Cutmaster 51 Plasma cutter -Smith OA torches I'm self taught at using all my equipment so I suck but I have a good time.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode