Page 4 of 4 FirstFirst 1234
Results 31 to 34 of 34
  1. #31

    Join Date
    Apr 2002
    Posts
    874
    Location
    Monroe,Washington
    Tractor
    New holland TC29-9x3 Woods 1012 FEL, Woods, 7500 Backhoe / Kubota L345DT 4WD, Kub FEL, Kub Backhoe

    Default Re: 4000/4310/4410 rear wheel bolts - please respond

    Are the 6 unused holes tapered on the inverse side of the wheel, for wheel reversal?

  2. #32
    Gold Member
    Join Date
    Jun 2000
    Posts
    499
    Location
    Syracuse, New York
    Tractor
    1952 Case DC-4, 2001 JD4300 MFWD, HST

    Default Re: 4000/4310/4410 rear wheel bolts - please respond

    No. The flat holes are flat on both sides. The lug holes in use are tapered on the inside also to allow for reverse mounting of the rims. The rear wheels are mounted backwards (valve stem on the inside) in the pictures I posted earlier. The front wheels have to be mounted in the narrower position to clear the front anti-scalp wheels on the deck.

  3. #33

    Join Date
    Mar 2002
    Posts
    91
    Location
    KCMO
    Tractor
    4310 4wd ehydro 420 loader asof 4/2/02

    Default Re: 4000/4310/4410 rear wheel bolts - please respond

    My 4310 has over 20 hours now with taper bolts and I constantly monitor my bolts. I have no movement yet. I have thought if I have a loose bolt I will use blue locktite. I have done some major loader work and box bladeing on top of mowing about 3 acres. I hope this thing holds together.

  4. #34
    Platinum Member joecdeere's Avatar
    Join Date
    Apr 2002
    Posts
    580
    Location
    Cumming,Georgia

    Default Re: 4000/4310/4410 rear wheel bolts - please respond

    01-11-35-05
    Functional Group: 0100
    DTAC Solutions Legacy: LV51480 Web: 51480
    16 November 2001
    John deere Augusta
    WHEEL DISK TO AXLE BOLTS LOOSEN AND BREAK
    Compact Utility Tractor
    4200C( -426437), 4200H( -421852), 4200E(-429133),
    4300C( -435497), 4300S( -437270), 4300H( -432548), 4300E(-439289),
    4400S( -446531), 4400H( -441883), 4400E(-449424)
    Complaint or Symptom:
    Rear wheel disks to axle bolts loosen and
    break on the following tire sizes:
    11.2-24 4 PR R3 Rear Wheel
    14-17.5 6 PR R4 Rear Wheel
    11.2-24 4 PR R1 Rear Wheel
    15-19.5 6 PR R4 Rear Wheel
    12.4-24 6 PR R1 Rear Wheel
    Problem:
    1. Conical hub bolts loosen during forward
    and reverse cycle or hillside operation.
    2. Loose hub bolts allow disk holes to
    wallow oblong.
    3. Current countersunk holes in disk may
    not provide adequate hub bolt mating
    surface.
    NOTE: Symptoms described above are for
    the flat disk, not coined disk design.
    Solution:
    1. Check for stripped threads. Drill and
    Helicoil axle tapped holes, if necessary.
    2. Replace disk if holes are wallowed.
    3. Replace all original hardware with new
    bolt and flat washer to provide improved
    clamping force.
    4. Remove paint from the axle flange and
    wheel bolt circle mating surfaces.
    5. Replace wheels and tighten wheel to
    axle bolts to 154 N m (114 lb-ft).
    6. Wheel bolts should be clean but not
    oiled. Oil will decrease friction, allow
    more torque and break the bolt.
    Parts:
    16-LVU12708 Bolt (Wheel to Axle)
    16-24M7436 Washer (M14x32x4mm)
    2-Wheel (See Parts Catalog)
    Additional Information:
    Check torque at 10 hour interval for the first
    20 hours. Check torque often during the first
    100 hours.

Page 4 of 4 FirstFirst 1234

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.