Results 1 to 4 of 4
  1. #1
    New Member
    Join Date
    Mar 2009
    Posts
    16

    Default case ih jx 60

    I have a JX 60 that i'm having trouble getting the three point linkage to lower. Anyone have any advice?

  2. #2
    Veteran Member
    Join Date
    Sep 2005
    Posts
    1,324
    Location
    Ohio
    Tractor
    Case DX55, Ford 850

    Default Re: case ih jx 60

    Is there a knob/dial in front of the seat? If so, loosen it to increase the drop speed of the 3ph.

  3. #3
    New Member
    Join Date
    Mar 2009
    Posts
    16

    Default Re: case ih jx 60

    there is't a knob in front of the seat, there is a fast raise/lower limit adjust down on the linkage and there is a fast raise/lower control switch on the fender. I have adjusted both these items to a position that should allow me to lower, it just dosn't go down, even with a back blade connected

  4. #4
    New Member
    Join Date
    Mar 2009
    Posts
    16

    Default Re: case ih jx 60

    I have now been told by the dealer i purchased the tractor from, that it may be related toward the hydraulic line running to the loader. If this fitting is incorrect or blocked the 3 point linkage won't work?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.