sequachiebill
New member
- Joined
- Apr 30, 2010
- Messages
- 14
i have a 2005 kubota bx 1830 which is leaking out oil from where the 4 wheel drive shaft comes into the front axel. when i removed the plastic cover, i could see that the shaft that goes into the front axel can actually move in and out about a quarter of an inch. after looking at the parts book blow up. i wondered if the oil seal cover screws off or is pried off, and i figure most likely one of the retaining clips let loose. has any body had to replace one and know any tricks or is it pretty straight foward and do i have a good idea on what is going on? thanks bill