Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1

    Join Date
    Aug 2002
    Posts
    125
    Location
    Denver foot hills
    Tractor
    MF 1215

    Default NH 2120 anybody?

    The NH XX15s, XX20s and XX25s were around before the Deere 4XXX and the Boomers. Does anyone watching have one of these venerable machines? The only remaining models in this line up are the 2120 and 3415 and I don't know how much longer they will be in production. The TC30 is a re-issued 1720/1725 -guess they had second thoughts after pulling it off the line. As I have to contend with the slopes of the Denver Foothills the TC30 looks wider and lower than the Boomers or Deeres and will probably be my upgrade in the next couple of years.

  2. #2
    Platinum Member knucklehead's Avatar
    Join Date
    May 2002
    Posts
    818
    Location
    Maine
    Tractor
    1979 Ford 1700

    Default Re: NH 2120 anybody?

    I'm not a 2120 owner - I just bought a '79 1700 this Summer, but I got dangerously near to buying a new kubota before I found my old iron. The dealer I was bothering [img]/w3tcompact/icons/grin.gif[/img], is also a NH dealer - on the lot, they had a <A target="_blank" HREF=http://www.unionfarmequip.com/equipused/images/usedequip/USE02057-b.jpg>used 2120</A>. I looked it over pretty closely, and it is a lot more tractor than some of the new CUTs.

    If I was in the market for a tractor, I would look at the 2120 and try not to get too messed up with all those new model Kubotas, and She-boomers with those sexy curved loaders. Not that there's anything wrong with them, but I am very impressed with the 2120.

  3. #3
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    47,918
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: NH 2120 anybody?

    I have a 1997 NH 1920, and it is the best tractor I have driven so far.

    Mine is 4wd, w/ gear tranny. Probably the only thing I would trade it for would be a 2120.

    It is strong and hte weight is just right. I like the 4cyl engine it has, as opposed to the 3 cyl that the 'equivalent' boomer has.

    Soundguy

  4. #4
    Veteran Member Rowski's Avatar
    Join Date
    May 2000
    Posts
    1,478
    Location
    North Central Vermont, Jay Peak Area
    Tractor
    2004 New Holland TN70DA with 32LC loader, 2000 New Holland 2120 with Curtis cab, 7309 loader

    Default Re: NH 2120 anybody?

    I do. The tractor has been great[img]/w3tcompact/icons/smile.gif[/img]! The tractor has done everything I ask, just the dealer hasn't[img]/w3tcompact/icons/sad.gif[/img]. The only regret is not getting the shuttle shift.
    Attached Images Attached Images

  5. #5

    Join Date
    May 2002
    Posts
    113
    Location
    Adamsville Pa / Williamsport Md
    Tractor
    John Deere 2640 / Ford 1710 / MTD 2554 ZERO TURN MOWER

    Default Re: NH 2120 anybody?

    Ditto Guys
    I have a 1710 4wd that I am using to clear/maintain about an acre and a half with.When the time comes and I can leave"the city smell behind"and move back to the farm I will be looking to trade up to the 2120
    Bartman

  6. #6

    Join Date
    Aug 2002
    Posts
    125
    Location
    Denver foot hills
    Tractor
    MF 1215

    Default Re: NH 2120 anybody?

    Thanks for the photo R! Looks like you take good care of your machine, she looks gooood! Have you talked to a NH dealer (other than the one you're not happy with) about the plans for the 2120 production wise for future availability?

  7. #7

    Join Date
    Feb 2002
    Posts
    111
    Location
    Armada, Michigan

    Default Re: NH 2120 anybody?

    I have this one on consignment...Nice tractor.
    Attached Images Attached Images

  8. #8
    Platinum Member knucklehead's Avatar
    Join Date
    May 2002
    Posts
    818
    Location
    Maine
    Tractor
    1979 Ford 1700

    Default Re: NH 2120 anybody?

    Just for kicks, the 2120 I linked to has the Woods loader (as you can see) with a quick detach bucket, a second aux hydraulic circuit going to the front with a second lever next to the loader control. It has 395 hrs, is HSS (as can be seen), and they are asking $18,500. I think Vince's price isn't too bad, either.


  9. #9
    Super Star Member RoyJackson's Avatar
    Join Date
    Nov 2001
    Posts
    18,528
    Location
    Bethel, Vermont
    Tractor
    John Deere 4400 MFWD, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements

    Default Re: NH 2120 anybody?

    "I have this one on consignment...Nice tractor.

    Jinma dealer in SE Michigan. "


    What is that box mounted on the fender? It's shown just to the right of the ROPS mounted flasher.


  10. #10

    Join Date
    Apr 2002
    Posts
    874
    Location
    Monroe,Washington
    Tractor
    New holland TC29-9x3 Woods 1012 FEL, Woods, 7500 Backhoe / Kubota L345DT 4WD, Kub FEL, Kub Backhoe

    Default Re: NH 2120 anybody?

    That box wouldbe a fender mounted radio.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.