Ok...sorry, I still don't get it. I use my box scraper alot. I am putting in trails through my woods. I use my box scraper to smooth , cut, dig, etc. I use the adjustment of the right rear arm to tilt the box on side hills to cut deeper on the top side. (wish they made one that was automatic) I also use the FEL to take out say a big rise just before getting to a big dip in terain, then smooth it out with box scraper.
So,no I do not plow with a plow, but do alot with box scraper. So...does the draft control put down force on the arms to apply top force on the implement? In other words, is it like putting weight, or block on top of the implement to keep down force on it? The more draft you apply, the more force? Sorry to be so thick headed but I have played around with the thing and don't seem to get diff results. As much box work as I am doing and will keep doing, if this thing is a great help, it would be worth while to learn how to use it. Any more explanation? And, if the lever is forward, top pointing toward front of tractor, does that mean the draft is off?