Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1

    Join Date
    Sep 2002
    Posts
    21
    Tractor
    JD 4110

    Default mid-mount mower clips for JD4110

    I know someone mentioned this before, but does anyone know the part number for the special clips that enable holding the mid-mower up on a JD4110, while a rear 3pt attachment is used.

  2. #2
    Elite Member thcri's Avatar
    Join Date
    Jan 2003
    Posts
    4,667
    Location
    Minnesota SE
    Tractor
    New Holland TC29D, 2001

    Default Re: mid-mount mower clips for JD4110

    mtheil,

    Your right we did talk about it in an earlier post. I believe it was a post comparing the 2210 versus the TC21D or something like that. But I don't think anyone gave the part number for it. I remember the price was about $75.00. But I was on the understanding that the new 4X10's did not need that. I thought it was only on the 4x00 series. Maybe the 4x00 series you couldn't get a kit at all? Not sure, but you should be able to find it in the accessories list in your manual or the dealer should be able to get you the part# and price.

    murph

  3. #3

    Join Date
    Sep 2002
    Posts
    21
    Tractor
    JD 4110

    Default Re: mid-mount mower clips for JD4110

    Thanks for reminding me of what was said earlier. Interestingly, I aksed my dealer about this when I first picked up the tractor, he wasn't sure. I need to press them to look, now that I see a definite benefit of having it.

  4. #4

    Default Re: mid-mount mower clips for JD4110

    You do need it on the 4X10 series tractors. My dealer didn't know it existed when I purchased the tractor. I'm getting one before the spring mowing season starts--well worth the money.

    Bob

  5. #5

    Join Date
    Feb 2003
    Posts
    100
    Location
    Omaha, NE
    Tractor
    Deere 4110 HST w/R4s

    Default Re: mid-mount mower clips for JD4110

    Murph mentioned that he thought the 4X10s might not require the pin kit to hold the mmm up when lowering a rear implement. Does anybody know for sure if this is the case? I'm not sure I'll ever need to do this on my 4110, but I always like to know what I can and can't do.
    I haven't closely examined the mmm attachment to see if there is some type of built in pinning system.
    Thanks
    Heath

  6. #6

    Default Re: mid-mount mower clips for JD4110

    Heath,

    Just to clarify, not only do you need this on the 4X10 models so that you can keep the mower up while using the 3 pt, it can also be used to keep the mower at the same level (from one mowing to the next).

    Bob

  7. #7
    Elite Member thcri's Avatar
    Join Date
    Jan 2003
    Posts
    4,667
    Location
    Minnesota SE
    Tractor
    New Holland TC29D, 2001

    Default Re: mid-mount mower clips for JD4110

    Heath,

    I brought this whole thing up sometime ago. Basically it kind of got to a heated up discussion. I was first told that "never heard of such a thing" I had people telling me to just raise the wheels on your mower. I had people saying that they use theirs all the time and never heard of a kit. Two dealers told me they did not know of a kit. So I guess the last of it was that you did need it on the 4x00 but not the 4x10 series. Basically the whole post turned out to be a mess.

    I would take Bob in Mn's advice. He has one and he says you need it. Now one thing I would also say is John Deere probably made it the easiest of all to take the mower on and off. My New Holland is a bear.

    murph

  8. #8

    Default Re: mid-mount mower clips for JD4110

    Murph

    You aren't alone--I spoke with 2 (JD) dealers when I purchased my tractor and neither of them mentioned the kit. Then last month when I was working with the owner of the JD dealer on some rebates they owed me, I mentioned the fact that this kit should be brought up with every sale. Not every person will use it, but my guess is most people would spend the extra $75-$90 when plunking down $15-$20K for a tractor.

    The owner said his salesperson (I bought from the sales manager) wasn't aware that this kit existed. I know what line of work you are in. My guess is that if you're installing a new system, you and your intallers are going to be up to speed on the new features. I know when a new insurance product is rolled out, I go to seminars to learn about how (or if) this product would help my clients.

    I can see I'm getting off topic hear--this is just another small lesson in how important the dealer is.

    Bob

  9. #9

    Join Date
    Feb 2003
    Posts
    100
    Location
    Omaha, NE
    Tractor
    Deere 4110 HST w/R4s

    Default Re: mid-mount mower clips for JD4110

    Thanks for the clarification. I apologize for resurrecting this topic! I read the other thread(s) on this topic, but I just wanted to find out if this pin system was available for my 4110 or built in to my 4110. Before this thread, I was under the impression that the kit was available for my 4110, but not built into the tractor. It sounds like my original thought was correct.
    Thanks for the clarification.

  10. #10

    Join Date
    Sep 2002
    Posts
    21
    Tractor
    JD 4110

    Default Re: mid-mount mower clips for JD4110

    Here's the skinny. Talked with my dealer today and found the kit part# BM19507. It goes for $70 and I have a attached a picture of the kit. You do need one for a 4110.
    Attached Images Attached Images

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.