Anonymous Poster
New member
- Joined
- Sep 27, 2005
- Messages
- 0
I'm sure some of us newer tractor owners would appreciate some pointers from the experts on proper bushhogging techniques. I have several questions
1. While BHing, is the "tail wheel" supposed to be carrying the weight of the cutter? Or does it ride just above the ground?
2. With at least 3 adjustment points (Tail wheel, Top link, Lift arms), is there a simple solution to adjusting the height of the cutter? Or do you just "play around" till you get it right?
3. My unit is an "Agri Four" and it is loud!! It sounds like it's going to fly apart. Shaft is straight and U-Joints are lubed. Sounded like that at the dealer and he didn't flinch. Any comments?
Thanks to those who have helped so far,
Rick
1. While BHing, is the "tail wheel" supposed to be carrying the weight of the cutter? Or does it ride just above the ground?
2. With at least 3 adjustment points (Tail wheel, Top link, Lift arms), is there a simple solution to adjusting the height of the cutter? Or do you just "play around" till you get it right?
3. My unit is an "Agri Four" and it is loud!! It sounds like it's going to fly apart. Shaft is straight and U-Joints are lubed. Sounded like that at the dealer and he didn't flinch. Any comments?
Thanks to those who have helped so far,
Rick