Results 1 to 4 of 4
  1. #1
    Platinum Member Mark Page's Avatar
    Join Date
    Sep 2009
    Massey Ferguson 2615 48hp, 4wd, loader

    Default Rust Killer

    When I took my suitcase weights off for the summer I noticed the bracket they hang on had a layer of rust on it. I cleaned most of the rust off with a wire brush and an abrasive wheel on a drill.
    I picked up a Loctite product at TSC that supposed to seal the rust in.
    I put down 2 coats and the next next morning the rust was colored black. 2 coats of rustoleum black paint and it looks good as new. Will have to see how long it lasts.
    Rust Converter Spray, Extend Rust Neutralizer from Loctite Adhesives
    Gear Up and Throttle Down.

    2011 Massey 2615, 7ft Woods Rear Discharge Finish Mower, 6 ft Lucknow Snow Blower, Danuser post hole digger with 12" and 24" augers, 350 lb 3 pt broadcast spreader, 7ft scraper blade, 7 ft. drag harrow, JD GT 275 rider with 38" snow blower attachment.

  2. #2
    Veteran Member
    Join Date
    May 2008
    Eastern Ia
    JD 4310 eHydro,

    Default Re: Rust Killer

    That is good to know about! Thanks!

  3. #3
    Platinum Member
    Join Date
    Dec 2011
    nc PA.
    kubota rtv900: kubota mx5200

    Default Re: Rust Killer

    yes. will have to see how long it lasts. please keep us posted as i always run into something that looks good at first, but doesn't last long and makes me feel like i wasted my time and money making it look good the first time and it doesn't last. usually i resort to a film covering of used waste oil. that does work, but i am looking for a better way.

  4. #4
    Gold Member
    Join Date
    Mar 2012
    Chesterfield, VA

    Default Re: Rust Killer

    Based solely on what I read on the Hotrodders forums, all this stuff does is turn the top layer of rust black. It doesn't remove it, it doesn't do anything to the rust underneath that layer and consequently doesn't stop further rusting. Supposedly the only way to really stop rust is to abrade the surface and seal with epoxy and then paint.

Similar Threads

  1. Surface rust on new 8TL FEL
    By afoster in forum Bobcat Tractors
    Replies: 29
    Last Post: 03-13-2011, 12:27 AM
  2. Trailer and implement rust
    By SpotsyMatt in forum Parts/Repairs
    Replies: 8
    Last Post: 04-10-2010, 05:36 PM
  3. rust on ram
    By mustang2105 in forum Hydraulics
    Replies: 6
    Last Post: 03-28-2010, 02:01 PM
  4. water / sand blasting - cleaning rust
    By dejswa in forum Rural Living
    Replies: 8
    Last Post: 09-20-2009, 11:08 PM
  5. Rust removal tip
    By Jethro in forum Kubota Owning/Operating
    Replies: 10
    Last Post: 10-13-2006, 11:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.