LHS Inc
Gold Member
- Joined
- Nov 16, 2010
- Messages
- 357
- Location
- Eastern Shore, Maryland
- Tractor
- JD 3520 eHydro w/300CX FEL
I'll be transporting my JD 3520 With FEL and Frontier RC 1060 on my 18 foot trailer on Tuesday for a bushhogging job.
With the bucket attached the whole unit will fit on the trailer with the wheel of the cutter hanging over the front about 1.5-2 ft.
It doesnt cause a problem while turning I just like to have everything inside the trailer.
Bucket off I can fit the whole unit inside the trailer.
My question is do I need the bucket on for ballist and stability or am I ok without it.
I tend to think I would need it on but this is my first job away from home with the RC. There is a slope on the property that I need to really study before I venture out. The whole area is on a commercial property and the slope comes of the parking lot and then flattens out.
I wouldn't give this slope a second thought with the JD 4010 but I know these CUT's are tippy so I'm being extra careful.
I'm cutting the lawn there tomorrow and I think I'll go back there on the mower and check it out and get a feel for it.
Thanks
With the bucket attached the whole unit will fit on the trailer with the wheel of the cutter hanging over the front about 1.5-2 ft.
It doesnt cause a problem while turning I just like to have everything inside the trailer.
Bucket off I can fit the whole unit inside the trailer.
My question is do I need the bucket on for ballist and stability or am I ok without it.
I tend to think I would need it on but this is my first job away from home with the RC. There is a slope on the property that I need to really study before I venture out. The whole area is on a commercial property and the slope comes of the parking lot and then flattens out.
I wouldn't give this slope a second thought with the JD 4010 but I know these CUT's are tippy so I'm being extra careful.
I'm cutting the lawn there tomorrow and I think I'll go back there on the mower and check it out and get a feel for it.
Thanks