Home made mulcher for BX photos

   / Home made mulcher for BX photos #1  

V1Rotate

Platinum Member
Joined
Oct 27, 2010
Messages
595
Tractor
New Holland TC 29D
Here are some photos of a mulcher plate I made for the BX. I just cut out a piece of heavy gauge sheet metal to match the shape of the mower outlet and welded a piece of angle iron to the top of it. I then drilled two holes on the top of the deck for the two 1/4 inch bolts that I welded to the angle iron, those two bolts act as locating pins. When the spring loaded deflector shute is down it holds the mulching plate down tightly.
Works great for mulching leaves.
 

Attachments

  • 009.jpg
    009.jpg
    253.4 KB · Views: 365
  • 007.jpg
    007.jpg
    251.6 KB · Views: 521
   / Home made mulcher for BX photos #2  
Gotta admit, I was wondering why you were mulching BX photos....:laughing:
 
   / Home made mulcher for BX photos
  • Thread Starter
#3  
   / Home made mulcher for BX photos #4  
good idea! :thumbsup:
 
   / Home made mulcher for BX photos #6  
Nice. Ive been wanting to do this since i removed the factory mulch plug. I hate blowing clippings into my tree rings when I forget to have the chute pointed in the right direction. Im going to make something that will operate from the drivers seat

See More Product Photos

EDIT: removed embedded picture.. IT was huge!! Go to link above if interested.
 
   / Home made mulcher for BX photos
  • Thread Starter
#7  
Thanks, I went to Tractor Supply and bought their "Kubota" orange spray paint. As you can see, it is close but it's not the real thing.
 
 
Top