green and red man
Member
- Joined
- Dec 5, 2011
- Messages
- 33
- Tractor
- a twaktur
Pardon me if this was posted in the wrong section. I have a very old drag type disc harrow and have no clue as to the manufacturer. It is the type that has a metal seat with levers to adjust the cutting action/depth. It cuts about a 6 foot swath and has two gangs of discs side by side.
I'm needing to replace some of the smooth disc blades that are about 14 1/2 inches in diameter and have a 7/8 inch square hole for the axle.
The part numbers that are cast into the parts all start with KK.
Did Farmall/IH early disc harrows have part numbers that began with KK? I'm guessing this disc was made between 1920 and 1940.
Does this description sound familiar?
I'm needing to replace some of the smooth disc blades that are about 14 1/2 inches in diameter and have a 7/8 inch square hole for the axle.
The part numbers that are cast into the parts all start with KK.
Did Farmall/IH early disc harrows have part numbers that began with KK? I'm guessing this disc was made between 1920 and 1940.
Does this description sound familiar?
Last edited: