Results 1 to 3 of 3
  1. #1
    New Member
    Join Date
    Dec 2012
    Posts
    1
    Location
    Irmo, SC
    Tractor
    MF 135

    Default MF 135 AG3

    I have a 1974 MF 135 Perkins AG3 How do I set the timing with distributor. I also have a box blade attached to the three point hitch. The box blade is not low enough. Can I change out the length of the lift arms? Use longer ones.

  2. #2
    Super Star Member murphy1244's Avatar
    Join Date
    Nov 2011
    Posts
    16,570
    Location
    Ohio
    Tractor
    Kioti DK 40-Massey ferguson 135-Ventrac 4500 Diesel

    Default Re: MF 135 AG3

    Murph ------------

  3. #3
    Super Member 94BULLITT's Avatar
    Join Date
    Feb 2011
    Posts
    7,285
    Location
    Frederick County, VA
    Tractor
    Kubota BX2360 & L4240 HSTC

    Default Re: MF 135 AG3

    to the forum.

    There is a timing window on the left side of the block. The timing marks on the flywheel, you may need to clean them up to see them. Timing needs to be set 12*BTDC. Max advance is 24-28*BTDC.

    I do not recommend modifying your lift arms to work with your box blade. They will not work right for other attachments then and it will cut down on your lifting capacity by extending them. You would also need a new toplink. I think the best thing would be to raise the attachment points on the box blade.

Similar Threads

  1. What are the differences between a MF 135 "special" and the MF 135 "deluxe"
    By MasseyLady in forum Massey Ferguson Classic/Vintage
    Replies: 38
    Last Post: 12-17-2012, 07:01 PM
  2. Loader MF 135
    By tattoo1979 in forum Massey Ferguson Classic/Vintage
    Replies: 6
    Last Post: 04-25-2012, 10:43 PM
  3. 135 MASSEY FERGUSON AG3-152 Oil Leaks
    By stanmcleod in forum Ag Tractors & Machinery
    Replies: 3
    Last Post: 11-11-2010, 09:35 AM
  4. MF 135 AG3-152
    By Texas Blues in forum Massey Ferguson Classic/Vintage
    Replies: 10
    Last Post: 03-29-2009, 07:24 PM
  5. MF 135 value?
    By anthonyk in forum Massey Ferguson Classic/Vintage
    Replies: 3
    Last Post: 04-23-2004, 06:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.