Oil & Fuel OIL DIPSTICK STUCK

[rike]

CURLY DAVE
Re: stuck engine oil dip stick

Thanks I'll keep that on mind and hope its not too curl up.

[npalen]

Vise Grips & a Slide Hammer - The Garage Journal Board
Might need to rig one of these.

[tmc_31]

Don't know if you can get to the crankshaft pulley or not. If you can you might try rotating it backwards a little while pulling on the dip stick.

Tim

[rike]

RE: engine oil dip stick stuck

I thank you all 4 your helpful advice. I put them all together; made a contraction with a short piece of chain and used a tire mount-dismount bar for leverage, and wham it pulled out in one piece.

Rike

[Hammsman]

so why was it stuck?

[Guesseral]

Oh come on don't leave us hanging!

[murphy1244]

RE: engine oil dip stick stuck

I thank you all 4 your helpful advice. I put them all together; made a contraction with a short piece of chain and used a tire mount-dismount bar for leverage, and wham it pulled out in one piece.

Rike

Good job!

[npalen]

I assume you meant to say "contraption" rather than "contraction" but either way it worked.