bwarm
New member
I just recently purchased a bx2200. The lady didn't know the year (how do I find it?) but it had 300 hours on. I bought it with a soft side Curtis cab, 50" snow blower, LA211 FEL and a rear drag blade. Did not come with any manuals..... Was hoping to purchase a bigger tractor but the price was hard to pass up.
I have been looking it over to prepare to mount the snow blower. It appears the hydraulic controls are mounted to the FEL bracket. So I have a couple questions. Is there a way to remove the FEL without having to remove the pivot pins that have the grease zerks? If not, is there an after market mount or anything? All the information out there the just says to remove the pins and roll the bucket until the loader comes off. I've attached some pics of the loader arm where the controls are. It seems really lame to have to remove those pins.
Thanks for the help. Any other suggestions to make mine and the little bx's lifes easier is much appreciated!!
I have been looking it over to prepare to mount the snow blower. It appears the hydraulic controls are mounted to the FEL bracket. So I have a couple questions. Is there a way to remove the FEL without having to remove the pivot pins that have the grease zerks? If not, is there an after market mount or anything? All the information out there the just says to remove the pins and roll the bucket until the loader comes off. I've attached some pics of the loader arm where the controls are. It seems really lame to have to remove those pins.
Thanks for the help. Any other suggestions to make mine and the little bx's lifes easier is much appreciated!!