Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1

    Default pto reverser for kubota b6000

    I know I'm asking for the impossible, but I would like to find a pto reverser for a kubota b6000, I have the original rototiller, which works fine with the pto, but I would like the option of using standard equipment thanks don

  2. #2
    Elite Member sandman2234's Avatar
    Join Date
    Dec 2005
    Posts
    4,108
    Location
    Jacksonville, Florida
    Tractor
    JD2555 and a few Allis Chalmers

    Default Re: pto reverser for kubota b6000

    They are available, but not cheap. If you are, or know a machinist, you might build one, as they aren't too complicated. We thought about building one, but the owner of the B6000 decided to go another way. He re-engineered a mower that I had to work in reverse. All it took was changing the idler pullies so they would keep the belts tight going the opposite way, and putting new blades on it, that cut in the opposite direction. He is pretty handy but he did all that in one afternoon. The blades he found for the finish mower were 1/2" shorter than the originals, but they don't leave a gap as they cut, so that is the main thing.
    He looked at a couple of the old bush hogs I have and considered putting reverse cutting blades on them. The finish mower does the cutting he needs so he didn't do the bush hog, although it would probably be easier than the finish mower.
    What other attachments do you want to be able to use?
    David from jax
    A serious accident is one that money won't fix.

  3. #3
    Silver Member
    Join Date
    Mar 2007
    Posts
    140
    Location
    Mounds Oklahoma
    Tractor
    L3010 & BX2200

    Default Re: pto reverser for kubota b6000

    I am going to sound real stupid here, but throw me a bone, what is a PTO reverser and what would it run, what would it do for a mower, or any other PTO equipment why would a roto tiller work but not "regular" equipment???????????

  4. #4
    Elite Member sandman2234's Avatar
    Join Date
    Dec 2005
    Posts
    4,108
    Location
    Jacksonville, Florida
    Tractor
    JD2555 and a few Allis Chalmers

    Default Re: pto reverser for kubota b6000

    A lot of the B6000 grey market tractors came with tillers that bolt right onto the rear of the housing. No pto shafts to speak of in the normal sense of the term. The diesel engines also turn the opposite direction, so the output for the pto is basically turning backwards. I think Woods offers a mower for these reverse turning pto shafts, but some people buy a reverser that attaches to the pto and changes the direction of turn so "regular" implements can be used, without having to be concerned about which way the thing rotates. Don't feel bad about not knowing that there are tractors that turn the reverse way. I worked on one and didn't realize it until days later.
    David from jax
    A serious accident is one that money won't fix.

  5. #5
    Silver Member
    Join Date
    Mar 2007
    Posts
    140
    Location
    Mounds Oklahoma
    Tractor
    L3010 & BX2200

    Default Re: pto reverser for kubota b6000

    Well one more thing to add to the memory bank Thanks for the education

  6. #6
    Elite Member sandman2234's Avatar
    Join Date
    Dec 2005
    Posts
    4,108
    Location
    Jacksonville, Florida
    Tractor
    JD2555 and a few Allis Chalmers

    Default Re: pto reverser for kubota b6000

    Yenibiz en Detail Angular reduction gear

    Just in case somebody wants one, I mean really wants one! If my calculations for currency exchange were right a while back it isn't cheap!
    David from jax
    A serious accident is one that money won't fix.

  7. #7
    Veteran Member
    Join Date
    Nov 2004
    Posts
    1,157

    Default Re: pto reverser for kubota b6000

    $775 from that site.

    I decided it was cheaper just to sell my B6000 and find something different.

  8. #8

    Default Re: pto reverser for kubota b6000

    the one from yenbiz is a 18spine input, and most of the b6000 that were imported into the US have a 10 spline shaft. The pto reverser needs to have a 1" 10 spline input and a 1 3/8" 6 spline output, with a 1:1 GEAR RATIO. there are pto reversers out there, but they are hard to come by. the farmall has the right size shaft, but the gearing isn't right, as the pto runs too fast.

  9. #9
    Elite Member sandman2234's Avatar
    Join Date
    Dec 2005
    Posts
    4,108
    Location
    Jacksonville, Florida
    Tractor
    JD2555 and a few Allis Chalmers

    Default Re: pto reverser for kubota b6000

    I think the B6000 has a 25 mm diameter shaft, but since I don't own one, I can't go measure it.
    David from jax
    A serious accident is one that money won't fix.

  10. #10
    Platinum Member
    Join Date
    May 2007
    Posts
    846
    Location
    eastern PA-lower Poconos
    Tractor
    JD2320 w/R4 $21,100 w/7.16%off

    Default Re: pto reverser for kubota b6000

    I don't know what you have in the pto spline and diameter department, but you can go here
    http://agriparts.vagcorp.com/catalogue/Linkages.pdf
    to see what's available in pto adapters. I don't know where you can get them but at least you'll know what's available.
    Eastern PA -JD2320 w/R4; 200CX w/61" bucket & Markham toothbar or JD adj forks; 46BH w/16", Imatch, ballast box & York rake-blade-scarifer, 54" front plow and trailer receiver. Case 580K w/fel+bh, mule 610XC

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.