Results 1 to 3 of 3
  1. #1
    New Member
    Join Date
    Feb 2008
    180 allis, A,M,farmall, 3000 ford

    Default hyd control lever

    Just bought taylor-way 3 point backhoe. one lever that lowers the foot is very hard to move. It takes two hands to move. any advise. thanks

  2. #2
    Gold Member
    Join Date
    Jan 2007

    Default Re: hyd control lever

    First thing I'd check is the pivot point of the lever. It is possible that there is a rusted bolt or bushing there. If that doesn't do the trick, it may be something inside the valve body. Is the relief valve buzzing when you extend or pull back the cylinder in question? If yes, it may be an obstructed line, bad cylinder packing, or bad valve mechanism, or an obstruction somewhere.

  3. #3
    Old Timer Soundguy's Avatar
    Join Date
    Mar 2002
    Central florida
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: hyd control lever

    Pull the handle off.. see if the spool itself is hard to move..


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.