kubota clutch

chevyman003 · 05-11-2008, 10:43 AM

im wanting to know if any one has had to replace a clutch on any kubota tractors and the pricing on the clutches and throw out bearing for a L225dt ? the year is about a 1976 to a 1978 model !!!

PitbullMidwest · 05-12-2008, 02:02 PM

I had the clutch replaced in my 1998 L2900gst a month ago. Parts, labor and transport both ways = $1381.00

RobJ · 05-14-2008, 12:24 PM

On my L2500..

plate - $92
bearing - $30
Pressure plate (if you need it) $131

My BIL has a L175 (2 cylinder 16hp Kubota)

plate - $67
bearing - $21
pressure plate - $112

Prices right off Tractorsmart.com. Lots of labor because you have to split the tractor. not much else to it.

Good Luck,
Rob

PitbullMidwest · 05-15-2008, 10:05 AM

Here's the breakout on my clutch replacement:

1 PPA/Woven Disc 226.50
1 Release bearing 80.66
1 Resuface flywheel 60.35
1 Surface cleaning 9.28
1 Bolt 0.87
1 O ring 0.79
1 Spring, nut 3.39
1 Clamp 1.17
TOTAL PARTS 383.07

Shop supplies and environmental fee 35.00
Shipping on parts 18.11
TOTAL MISC 53.11

TOTAL Pickup/delivery - 87.00

TOTAL LABOR 768.00

TAX 90.38

GRAND TOTAL 1381.56

05-11-2008, 10:43 AM	#1 (permalink)
chevyman003 New Member Join Date: Apr 2008 Posts: 9	kubota clutch im wanting to know if any one has had to replace a clutch on any kubota tractors and the pricing on the clutches and throw out bearing for a L225dt ? the year is about a 1976 to a 1978 model !!! Last edited by chevyman003 : 05-11-2008 at 10:43 AM. Reason: kubota clutch n throw out bearing.

05-12-2008, 02:02 PM	#2 (permalink)
PitbullMidwest Platinum Member Join Date: Sep 2001 Location: SE Iowa Posts: 905	Re: kubota clutch I had the clutch replaced in my 1998 L2900gst a month ago. Parts, labor and transport both ways = $1381.00 __________________ Curt "No man having put his hand to the plow and looking back is fit for the Kingdom of God" - Luke 9:62

05-14-2008, 12:24 PM	#3 (permalink)
RobJ Elite Member Join Date: Jul 2005 Location: Spring, TX (Houston) Posts: 2,665	Re: kubota clutch On my L2500.. plate - $92 bearing - $30 Pressure plate (if you need it) $131 My BIL has a L175 (2 cylinder 16hp Kubota) plate - $67 bearing - $21 pressure plate - $112 Prices right off Tractorsmart.com. Lots of labor because you have to split the tractor. not much else to it. Good Luck, Rob __________________ L2500

05-15-2008, 10:05 AM	#4 (permalink)
PitbullMidwest Platinum Member Join Date: Sep 2001 Location: SE Iowa Posts: 905	Re: kubota clutch Here's the breakout on my clutch replacement: 1 PPA/Woven Disc 226.50 1 Release bearing 80.66 1 Resuface flywheel 60.35 1 Surface cleaning 9.28 1 Bolt 0.87 1 O ring 0.79 1 Spring, nut 3.39 1 Clamp 1.17 TOTAL PARTS 383.07 Shop supplies and environmental fee 35.00 Shipping on parts 18.11 TOTAL MISC 53.11 TOTAL Pickup/delivery - 87.00 TOTAL LABOR 768.00 TAX 90.38 GRAND TOTAL 1381.56 __________________ Curt "No man having put his hand to the plow and looking back is fit for the Kingdom of God" - Luke 9:62

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode