Results 1 to 2 of 2
  1. #1

    Default Massey Furguson diesel injector pump

    I have a Massey Ferguson 2203 with an AD 3 152 perkins diesel. I has been stopping when hot. It will now not start at all. I have investigated using the bleeding tips online and in the process got it to start - it only starts with the top bleed hole open on the injector pump. Of course if spits lots of fuel out and when I close the bleed screw it the engine stops. The gasket between the pump body and the top cover has also blown. This was not the case before this problem occured. So I have two questions; What is the problem with the fuel system? and how do I replace the gasket on the injection pump.

  2. #2
    Elite Member RobJ's Avatar
    Join Date
    Jul 2005
    Posts
    3,478
    Location
    Spring, TX (Houston)
    Tractor
    Kubota L2500

    Default Re: Massey Furguson diesel injector pump

    If the gasket blew check the return line, sounds like it may be clogged. If yo ucan handle some stuff under the cover and can find a gasket, you might be able to change it out. Otherwise I'd take it to a pump shop and let them fix and test it.

    Good Luck,
    Rob
    Last edited by RobJ; 05-16-2008 at 01:57 PM.
    L2500

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.