Great Bend Loader Bushings

Behrend II · 06-09-2008, 11:48 AM

Hello,

I've got a GB 224 FEL and it appears that the four bushings for the bucket attachment need to be replaced. They slide inside the tube where the tilt rams on top attach to the bucket and where the loader arms attach to the bucket on the bottom. They slide inside the tube and the attachment pins then slide through them. They are the pivot point for the the bucket and have grease zircs feeding them. The problem: all the GB dealers that I talk to say there aren't any bushings listed on their parts details. HELP!

Tom

Kays Supply · 06-09-2008, 04:57 PM

Check with Bush Hog. They have combined with Great Bend. I don't know who bought out who.

john_bud · 06-11-2008, 12:26 AM

GIven the dealer says there are no bushings, can it be that a prior owner used a too small pin and bushed it to fit?
jb

California · 06-11-2008, 01:11 AM

Quote:

Originally Posted by Behrend II

... HELP!

Forget dealer service. GB is gone, and Bush Hog says that's not our problem. I made all the same inquiries in 2003 and got nowhere.

I think GB loaders were built out of generic parts and any good hydraulics shop can arrange to get it re-bushed locally.

Behrend II · 06-11-2008, 02:34 AM

Thanks for the help guys. The loader was brand new when I bought the tractor - had never been used. According to their website, Bush Hog owns Great Bend and GB loaders are still sold, including the model that I have. I'll probably go ahead and check with a hydraulic shop if I can't get anywhere with Bush Hog/Great Bend. Another one of those things that I thought would be a quick fix that is turning out not to be!

john_bud · 06-13-2008, 12:44 AM

Quote:

Originally Posted by Behrend II

Thanks for the help guys. The loader was brand new when I bought the tractor - had never been used. According to their website, Bush Hog owns Great Bend and GB loaders are still sold, including the model that I have. I'll probably go ahead and check with a hydraulic shop if I can't get anywhere with Bush Hog/Great Bend. Another one of those things that I thought would be a quick fix that is turning out not to be!

Planert in Eau Claire is good for hydraulics.

If you need machine work done - avoid Tainter Machine at all costs. Been ripped off by them before.

jb

Behrend II · 06-13-2008, 12:34 PM

Thanks for the tip John.

59ih340 · 06-16-2008, 05:34 PM

Try Messicks.They have parts diagrams online and are pretty good about having/getting the parts you need.

06-09-2008, 11:48 AM	#1 (permalink)
Behrend II New Member Join Date: Apr 2007 Location: Menomonie, WI Posts: 11	Great Bend Loader Bushings Hello, I've got a GB 224 FEL and it appears that the four bushings for the bucket attachment need to be replaced. They slide inside the tube where the tilt rams on top attach to the bucket and where the loader arms attach to the bucket on the bottom. They slide inside the tube and the attachment pins then slide through them. They are the pivot point for the the bucket and have grease zircs feeding them. The problem: all the GB dealers that I talk to say there aren't any bushings listed on their parts details. HELP! Tom

06-09-2008, 04:57 PM	#2 (permalink)
Kays Supply Silver Member Join Date: Jul 2006 Location: Southern Illinois Posts: 209	Re: Great Bend Loader Bushings Check with Bush Hog. They have combined with Great Bend. I don't know who bought out who.

06-11-2008, 12:26 AM	#3 (permalink)
john_bud Elite Member Join Date: Sep 2000 Location: WI Posts: 4,872	Re: Great Bend Loader Bushings GIven the dealer says there are no bushings, can it be that a prior owner used a too small pin and bushed it to fit? jb __________________

06-11-2008, 02:34 AM	#5 (permalink)
Behrend II New Member Join Date: Apr 2007 Location: Menomonie, WI Posts: 11	Re: Great Bend Loader Bushings Thanks for the help guys. The loader was brand new when I bought the tractor - had never been used. According to their website, Bush Hog owns Great Bend and GB loaders are still sold, including the model that I have. I'll probably go ahead and check with a hydraulic shop if I can't get anywhere with Bush Hog/Great Bend. Another one of those things that I thought would be a quick fix that is turning out not to be!

06-13-2008, 12:34 PM	#7 (permalink)
Behrend II New Member Join Date: Apr 2007 Location: Menomonie, WI Posts: 11	Re: Great Bend Loader Bushings Thanks for the tip John.

06-16-2008, 05:34 PM	#8 (permalink)
59ih340 New Member Join Date: Jun 2006 Location: Middleton,NH Posts: 21	Re: Great Bend Loader Bushings Try Messicks.They have parts diagrams online and are pretty good about having/getting the parts you need.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode