Results 1 to 5 of 5
  1. #1
    New Member
    Join Date
    Sep 2009
    Posts
    4

    Default JD 4110 engine stopped

    Hello,
    I hope I can get some assistance with my JD 4110. This is a 3 year old machine with 100 hrs. During operations the engine shut down. I suspect an electrical component however I don稚 have access to an electrical schematic. After the engine stopped I attempted a re-start. With the key in the start position the starter won稚 engage (no power to solenoid). I have electrical power to the instrument panel and all lights work. Positive and negative battery and frame connections are good. Under the hood on the right-hand upper rear sided of engine compartment there is a black relay that clicks when the ignition switch is engaged. All four fuses are good. I would appreciate any input on what components and their locations that may be restricting current flow to my starter solenoid.

  2. #2
    Elite Member woodlandfarms's Avatar
    Join Date
    Jul 2006
    Posts
    4,910
    Location
    Los Angeles / SW Washington
    Tractor
    PowerTrac 1850

    Default Re: JD 4110 engine stopped

    Safety seat switch... Maybe a bad battery (They can read good but not be good). I think it is your seat switch...
    Power-Trac 1850, grapple, hoe, 90" mower, 72" box blade

  3. #3
    Old Timer Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    51,693
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: JD 4110 engine stopped

    pto switch.. or other safety switches like neutral -safe.. should be checked.. and as the other poster said.. check volts on the battery while trying to start..

    soundguy

  4. #4
    Super Star Member Egon's Avatar
    Join Date
    Aug 2001
    Posts
    19,251
    Location
    Nova Scotia, Canada

    Default Re: JD 4110 engine stopped

    upper rear sided of engine compartment there is a black relay that clicks when the ignition switch is engaged.
    That should be the fuel valve solenoid opening.

    Safety switches??
    Egon
    50 years behind the times
    Livin in a
    Worn out skin bag filled with rattlin bones

  5. #5
    Advertiser kennyd's Avatar
    Join Date
    Jul 2003
    Posts
    12,563
    Location
    Westminster, MD
    Tractor
    John Deere 4110, 455AWS

    Default Re: JD 4110 engine stopped

    Things to check...

    -Verify battery voltage while trying to start it.

    There are 3 safety's:
    -Seat switch (try pulling the switch UP when the seat is lifted, this positoin is for of-seat rear PTO operation)
    -PTO switch
    -Neutral switch (jiggle the lever while attempting to start)
    KennyD
    www.boltonhooks.com

    #BoltOnHooks



    Bolt On Grab Hooks, Weld On Grab Hooks, Specialty Chain and Rigging Accessories, Specialty Hydraulic Components, and MUCH more!

    Simple JDParts Tutorial HERE

    Visit our YouTube Channel

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.