PTO seal on Iseki TL2100

stnickstoys · 07-10-2002, 12:07 AM

Has anyone replaced a Pto seal on a TL2100. I was just wondering if that is something that I can get off and replace from the outside or do I have to split the tractor and go after it from the inside?
Nick

kubmech · 07-10-2002, 12:49 AM

If you are talking the rear pto, most tractors have a cover assy. that can be removed fairly easily, if the seal comes out from the front (inside the cover) and alot of tractors have the seal that comes out from the back. Not familiar with that model in particular but I'm betting It's not too big a deal.

stnickstoys · 07-10-2002, 10:12 AM

thanks kubmech,
I have to remove a couple brackets so I can see what would be able to come off.
nick

stnickstoys · 07-11-2002, 11:30 AM

Just for info, I did take the rear seal off. I took a sharp pick and pushed it through the rubber, hooked the inside of the seal and popped it right out. So glad I didn't have to go after it from the inside!!!!! I again went to my local Bumper to Bumper auto parts store and we found a match in the Chicago Rawhide seal line part number 13445 if anyone is interested in that info. Popped it in place with plenty of room to put the seal on a new part of the shaft to avoid the old seal groove and we were off and running with the brush hog again. Big smiles once again.
Have a great weekend,
Nick

07-10-2002, 12:07 AM	#1 (permalink)
stnickstoys Gold Member Join Date: Dec 2001 Location: Plum City, WI Posts: 329	PTO seal on Iseki TL2100 Has anyone replaced a Pto seal on a TL2100. I was just wondering if that is something that I can get off and replace from the outside or do I have to split the tractor and go after it from the inside? Nick

07-10-2002, 12:49 AM	#2 (permalink)
kubmech Join Date: Jun 2001 Posts: 711	Re: PTO seal on Iseki TL2100 If you are talking the rear pto, most tractors have a cover assy. that can be removed fairly easily, if the seal comes out from the front (inside the cover) and alot of tractors have the seal that comes out from the back. Not familiar with that model in particular but I'm betting It's not too big a deal.

07-10-2002, 10:12 AM	#3 (permalink)
stnickstoys Gold Member Join Date: Dec 2001 Location: Plum City, WI Posts: 329	Re: PTO seal on Iseki TL2100 thanks kubmech, I have to remove a couple brackets so I can see what would be able to come off. nick

07-11-2002, 11:30 AM	#4 (permalink)
stnickstoys Gold Member Join Date: Dec 2001 Location: Plum City, WI Posts: 329	Re: PTO seal on Iseki TL2100 Just for info, I did take the rear seal off. I took a sharp pick and pushed it through the rubber, hooked the inside of the seal and popped it right out. So glad I didn't have to go after it from the inside!!!!! I again went to my local Bumper to Bumper auto parts store and we found a match in the Chicago Rawhide seal line part number 13445 if anyone is interested in that info. Popped it in place with plenty of room to put the seal on a new part of the shaft to avoid the old seal groove and we were off and running with the brush hog again. Big smiles once again. Have a great weekend, Nick

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode