Page 35 of 75 FirstFirst ... 253233343536373845 ... LastLast
Results 341 to 350 of 750
  1. #341
    New Member
    Join Date
    Jun 2012
    Posts
    5
    Location
    al
    Tractor
    Husqvarna LTG26K54

    Default Re: TuffTorq K46 Repair Guide with Pictures

    Hey all I have a Husqvarna LGT26K54 26-HP with a TuffTorq K46aw I have only 5.8 hours so far I am big on full synthetic oil so got some 3 qt.s 5w50 Syntec will pull the TuffTorq out and do the old flip and fill with the Syntec is there more I can do? Super cooler?

  2. #342
    Bronze Member RBLapham's Avatar
    Join Date
    Apr 2011
    Posts
    78
    Location
    Tennessee
    Tractor
    John Deere X300

    Default Re: TuffTorq K46 Repair Guide with Pictures

    You should wait till about 50 hours before changing it. I did my deere X300 at 53 hours. You probably have a warentee so try to not scratch it up Just keep it clean is the other good tip on making it last longer.
    Deere X300, Plug aerator with winch

  3. #343
    New Member
    Join Date
    Jun 2012
    Posts
    5
    Location
    al
    Tractor
    Husqvarna LTG26K54

    Default Re: TuffTorq K46 Repair Guide with Pictures

    Quote Originally Posted by RBLapham View Post
    You should wait till about 50 hours before changing it. I did my deere X300 at 53 hours. You probably have a warentee so try to not scratch it up Just keep it clean is the other good tip on making it last longer.
    I didn't wail and OMG!! I am glad I did at 6.1 hours the the oil was like silver and black paint if that oil came out of my car I would fall over dead.But on the brite side I got the 5w50 Syntec in and I did it in 1 1/2 hours in all I had it on the floor in 11 min.s

  4. #344
    Bronze Member RBLapham's Avatar
    Join Date
    Apr 2011
    Posts
    78
    Location
    Tennessee
    Tractor
    John Deere X300

    Default Re: TuffTorq K46 Repair Guide with Pictures

    Quote Originally Posted by crazyflyboy30 View Post
    I didn't wail and OMG!! I am glad I did at 6.1 hours the the oil was like silver and black paint if that oil came out of my car I would fall over dead.But on the brite side I got the 5w50 Syntec in and I did it in 1 1/2 hours in all I had it on the floor in 11 min.s
    Mine at 53 hours was like new, even the magnet was pretty clean.
    Deere X300, Plug aerator with winch

  5. #345
    New Member
    Join Date
    Jun 2012
    Posts
    5
    Location
    al
    Tractor
    Husqvarna LTG26K54

    Default Re: TuffTorq K46 Repair Guide with Pictures

    Quote Originally Posted by RBLapham View Post
    Mine at 53 hours was like new, even the magnet was pretty clean.
    So what you are saying is my K46 as a catastrophe failure.
    Last edited by crazyflyboy30; 07-01-2012 at 12:04 AM.

  6. #346
    New Member
    Join Date
    Jul 2012
    Posts
    1
    Location
    Raleigh, North Carolina
    Tractor
    Husqvarna 2146xls

    Default Re: TuffTorq K46 Repair Guide with Pictures

    Speaking of catastrophic, my Husky has 257 hrs on it and the right rear axle broke into, wheel went flying off 5 ft from the mower. I have never put any any ground attachments on this tractor, only a bagger installed by the dealer when I bought it and I have never remove it. Out of Warr, my dealer id trying "to work something out" to help me ..

  7. #347
    New Member
    Join Date
    Jul 2012
    Posts
    2
    Location
    Wetumpka, Alabama
    Tractor
    JD/LTR-180

    Default Re: TuffTorq K46 Repair Guide with Pictures

    All of the guidance gave me the confidence to order the parts for the K46 transmission in my JD LTR-180. Got everything out....rebuilt and put back together then.......transmission runs in REVERSE! I must have put something in backwards or upside down! Reverse pedal drives the tractor forward but at reverse speed......Forward pedal drives tractor in reverse at high speed! Any idea what part that I put in wrong? Linkages are all correctly connected.

  8. #348
    Silver Member
    Join Date
    Jul 2000
    Posts
    221
    Location
    Western,MA
    Tractor
    JD 850, L130, 317

    Default Re: TuffTorq K46 Repair Guide with Pictures

    The ramp is upside down part #1 here is a pic from the first page of this thread.
    Attached Thumbnails Attached Thumbnails -oe-20054-jpg  

  9. #349
    Bronze Member RBLapham's Avatar
    Join Date
    Apr 2011
    Posts
    78
    Location
    Tennessee
    Tractor
    John Deere X300

    Default Re: TuffTorq K46 Repair Guide with Pictures

    Quote Originally Posted by Nielsenec View Post
    Forward pedal drives tractor in reverse at high speed! Any idea what part that I put in wrong? Linkages are all correctly connected.
    See page 2 of this thread post #19

    "It may benefit some folks to know that the wedge (part #8 on the pic in the 4th post) can be installed 2 ways; the way it appears in the picture, or 180 degrees out. The resulting actions due to an incorrect install will leave you with your forward and reverse foot pedals sending you tractor in the opposite direction. Don't ask me how I know this."
    Deere X300, Plug aerator with winch

  10. #350
    New Member
    Join Date
    Jul 2012
    Posts
    2
    Location
    Wetumpka, Alabama
    Tractor
    JD/LTR-180

    Default Re: TuffTorq K46 Repair Guide with Pictures

    After some further research of the different flavors of the K46 it appears as though a large percentage of the varieties (K46A) have part #36 of the schematics upside down as opposed to the picture in the 4th post. My error was not photographing my original configuration and just following the photo (which is for a different flavor than mine). The final issue was that I didn't know my variant as the bar-code label had fallen off the transaxle.

Page 35 of 75 FirstFirst ... 253233343536373845 ... LastLast

Similar Threads

  1. Replies: 13
    Last Post: 05-31-2009, 08:50 AM
  2. JD Owning/Operating FAQ (Please Help)
    By Muhammad in forum John Deere Owning/Operating
    Replies: 42
    Last Post: 02-08-2009, 10:38 PM
  3. cub cadet panel repair
    By harleyizy in forum Parts/Repairs
    Replies: 8
    Last Post: 12-12-2008, 12:49 AM
  4. Pictures, Pictures
    By ddl in forum News/Feedback
    Replies: 9
    Last Post: 11-17-2001, 08:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.