Page 41 of 82 FirstFirst ... 313839404142434451 ... LastLast
Results 401 to 410 of 817
  1. #401
    Member
    Join Date
    Dec 2011
    Posts
    39
    Location
    Northampton, Pa
    Tractor
    JD212, JD116h, JD L110, JD L130

    Default Re: TuffTorq K46 Repair Guide with Pictures

    Quote Originally Posted by rburke65 View Post
    Hey.....that's right....it's me again! Here is an update with my transaxle....IT'S ALIVE!! IT WORKS!! Yes. I feel that this was a great fix to at least get me through the Fall season and enable me to contend with all the leaves without a total rebuild. It took me a while to remove it, but the next time it will go much faster. THANK YOU! THANK YOU! To everyone on this site for making this fix affordable and quick. Ya got to love the Internet! Thanks.
    Once you have it down it will only take ten minutes to remove

  2. #402
    New Member
    Join Date
    Sep 2012
    Posts
    5
    Location
    France
    Tractor
    X165

    Default Re: TuffTorq K46 Repair Guide with Pictures

    Quote Originally Posted by rburke65 View Post
    Hey.....that's right....it's me again! Here is an update with my transaxle....IT'S ALIVE!! IT WORKS!! Yes. I feel that this was a great fix to at least get me through the Fall season and enable me to contend with all the leaves without a total rebuild. It took me a while to remove it, but the next time it will go much faster. THANK YOU! THANK YOU! To everyone on this site for making this fix affordable and quick. Ya got to love the Internet! Thanks.
    That's good to know. I'm about to drop my Transaxle and change the oil to 5 - 50 synthetic even though its only done 6 hours from new. The grass stopped growing as soon as I bought it as we've had no rain since July until last week!
    I'll do it along with the first service.

  3. #403
    New Member
    Join Date
    Jan 2008
    Posts
    14
    Location
    Canfield, Ohio
    Tractor
    1979 Kubota DT245, and a 2006 JD 155C

    Default Re: TuffTorq K46 Repair Guide with Pictures

    My neighbor, a very healthy and active 83 year old, just had the same issues with his JDeere. He maintains all of his equipment to the 9s. He took his 'no serviceable parts' JD to a dealer and they banged his over $1000! Thanks to this forum, I got mine back on the "road" for about $29! Thanks again guys/gals.
    Last edited by rburke65; 10-07-2012 at 09:52 PM. Reason: Needed a space

  4. #404
    New Member
    Join Date
    Sep 2012
    Posts
    5
    Location
    France
    Tractor
    X165

    Default Re: TuffTorq K46 Repair Guide with Pictures

    Quote Originally Posted by rburke65 View Post
    My neighbor, a very healthy and active 83 year old, just had the same issues with his JDeere. He maintains all of his equipment to the 9s. He took his 'no serviceable parts' JD to a dealer and they banged his over $1000! Thanks to this forum, I got mine backmon the "road" for about $29! Thanks again guys/gals.
    Ouch............

  5. #405
    New Member
    Join Date
    Oct 2012
    Posts
    1
    Location
    Parker, CO
    Tractor
    Deere L-130

    Default Re: TuffTorq K46 Repair Guide with Pictures

    Thanks to all who posted here. I have a Deere L-130 with a dead transmission, and I was able to get it apart, identify the problem and order the parts.

    However, unlike others who have had great service from Tuff Torque, I've had pretty lousy service. I spent all morning calling trying to get questions answered. I didn't get Derrick, I got Pam, who wanted to wait until after lunch to ask the questions to her co-workers. When I called back, she just directed me to the web site, and would NOT take my order over the phone. I ended up using the web site, and to date, my order has not shipped. The irony is that I had to pay $16 for ground shipping, while two orders I've placed at other companies on the internet on Saturday with FREE shipping have already been filled and shipped. Yet, I still wait for TuffTorque.

    I really wish there was another alternative to ordering these parts, but I feel stuck. I hope this $300 order fixes it and I never have to deal with these people again.

    Just wanted to write up my experiences, so that others here will know if you get the wrong person there, do not expect any help or service.

    Cheers,

    Howard

    Edit: I just got this from Derrick. There was No mention on the web site of back-orders nor did Pam mention it either time I spoke whth her. My fault... I should have asked for Derrick specifically. Lesson learned.

    Hello,
    I am sorry for the delay. We are currently waiting on the cylinder block
    kit. These should be in our hands by mid-week. Please advise.



    Thanks,

    Derrick Dalton
    Last edited by rv6tc; 10-08-2012 at 11:39 AM. Reason: new details

  6. #406
    New Member
    Join Date
    Jul 2012
    Posts
    5
    Location
    athol idaho
    Tractor
    craftsman lawn tractor 917.28870

    Default Re: TuffTorq K46 Repair Guide with Pictures

    -dsc00123-jpg-dsc00124-jpg-dsc00125-jpg-dsc00126-jpg-dsc00127-jpg
    These are pics of my Craftsman Lawn Tractor tranny version K46BT.
    Parked it last in July 2012 and saw oil under the tranny. Dropped the lower pan and parts fell out...DUH!
    Dropped the entire tranny and when on the internet to Sears to see the cost of replacement parts. They only sell a complete tranny for $350 back in July. I thought that was pretty expensive until I discovered this website and discovered the maker at TuffTorq. They wanted double that.
    I talked with Derrick back then but wasn't all that impressed with the answers I was getting but I wasn't that familiar yet with the tranny and what I eventually learned on this website. I went to order just the 37 tooth gear that had lost two teeth and then gouged two holes in the lower pan causing the oil leak. The lower pan costs $135 but I think I can heal it with some Loctite aluminum weld goo or maybe take it to a local heliarc welder to repair for hopefully about $20 (not verified yet). I was surprised by the $25 minimum purchase requirement, but after all the recommendations to use the 5/50 synthetic oil I can cover that requirement by buying from Tuff Torq with the gear and a few other small parts like some filters, drain plugs and extra pins that seem to get lost.
    All the help on this excellent website are appreciated and cheers to LOGG for starting it. All us HAVE TO DO IT OURSELFERS due to being broke in this horrible economy and can't afford better tractors are grateful to you all for your posts.
    I'll try to update as I make progress.
    I wouldn't buy another product from Sears as you can't repair most of them without getting gouged on replacement parts, especially my front load washer. Their management has ruined the company. Their cordless drill batteries cost as much as the whole drill cost and the keep changing batteries. I had to take mine to Batteries Plus to put new batteries in to be able to use my drill/saw combo kit. DON'T BUY SEARS TOOLS except for maybe their hand tools.

  7. #407
    Member
    Join Date
    May 2012
    Posts
    26
    Location
    fallston,maryland
    Tractor
    1958 JD 620,JD 410 backhoe,scotts L2548

    Default Re: TuffTorq K46 Repair Guide with Pictures

    I used a two part liquid steel for the much smaller hole in the trans pan, and it is holding up without leaks. My pics are back a few pages. The aluminum chips ground out of the pan scored up the pump and motor block....I am using valvoline 50 weight racing oil (high zinc content) because it is cheep and I plan to open up for inspection this winter. Once everything checks out I may switch to synthetic.

  8. #408
    New Member
    Join Date
    Jul 2012
    Posts
    5
    Location
    athol idaho
    Tractor
    craftsman lawn tractor 917.28870

    Default Re: TuffTorq K46 Repair Guide with Pictures

    Quote Originally Posted by MD83Z View Post
    I used a two part liquid steel for the much smaller hole in the trans pan, and it is holding up without leaks. My pics are back a few pages. The aluminum chips ground out of the pan scored up the pump and motor block....I am using valvoline 50 weight racing oil (high zinc content) because it is cheep and I plan to open up for inspection this winter. Once everything checks out I may switch to synthetic.
    Thanks for the info. I ordered my parts and took the lower pan to the local heliarc welder who charged $30. I should get it back any day now. I talked to Derrick at TT before ordering the parts to see if there was anything else I should order to avoid extra shipping for any small items I might need later. I ordered the#100 gear kit, a new filter, the 5/50 oil and a new sealing cap all for under $80 including the shipping.
    I'll call Derrick to see what else I might need to do if my pump, etc was damaged as you indicate.
    As repairs progress, I will update, especially if anything damaged needs to have a picture for others to see what happens in these trannies when things break.

  9. #409
    Silver Member
    Join Date
    Jul 2006
    Posts
    234
    Location
    Pittsburgh, Pa
    Tractor
    Chinese quality - Jinma 2420 - Ford 1900 - Steiner 420

    Default Re: TuffTorq K46 Repair Guide with Pictures

    Well, thanks to this thread I have successfully repaired my Craftsman Pro 24hp 42" model with the K46BT tranny. It was slow (and whiny) in going up hills and finally got worse last week. The tractor has been in service for 2 1/2 years and has 220hrs on it and was used pretty heavily on 4 acres during that time. I pulled the tranny out and popped off the rubber cap. Didn't have many metal shavings on the magnet. Dumped the dirty looking oil into a measured bucket to ensure I got all 2.15 quarts out of it. Then I poured in my 5W-50 syn that I bought at Advance Auto parts. ($9 a quart) Cleaned the magnet and put it back together with a new drive belt (1/2" x 92.4" - 130969) and purged it with out having the wheels on the ground moving the drive back and forth till it was smooth. Tested it out on my hills here for an hour cutting the grass and all is good again ! Thanks to all who have posted with the fixes. It's worked again !

    Steve (Pittsburgh, Pa)

  10. #410
    New Member
    Join Date
    Oct 2012
    Posts
    4
    Location
    Peterborough UK
    Tractor
    Countax, Cub cadet

    Default Re: TuffTorq K46 Repair Guide with Pictures

    Hi, amazing amount of info and intelligent discussion.

    My K46 tale...

    Area I mow is around 3 acres including some 40 degree gullys/slopes.

    I have a K46E in a C300 Countax and a spare (can't remember which variant) in a C600 I picked up along the way as a bargain (」75) for parts only (blown engine)

    When the first one started failing I replaced it with the spare. I stripped it down with help from the great info here and polished up the (scored) central case surfaces.

    I also noticed one of the diff gears (forward side) was in poor shape so that was a quick tidy up with a diamond file and swapped the large bevel gears over as a temporary solution while I thought about what to do about it ;-).

    Of course a few weeks in to thinking about it the spare started failing... So I swapped the original back and the temporary fix works fine forthe moment .

    Stripping the spare I found the diff gears in really bad condition - pics attached. Although as I've already swapped about 」200 worth of parts I can't complain too much.

    So as I'm in the UK and those nice people at TT don't take my debit card I tried t-g-m in the UK who were very helpful.
    Diff gear kit and filter in stock and delivered in a couple of days at roughly 1:1 usd/gbp which is pretty typical.

    Parts arrived today so it's a week end job.
    Best oil I can find locally is 5/40 synthetic and I'm toying with the idea of adding a temp gauge to the diff.



    -k46e-diff-gears2-jpg and -k46e-diff-wear-jpg
    Last edited by GeorgeBrennan; 10-18-2012 at 11:25 AM. Reason: pic update

Page 41 of 82 FirstFirst ... 313839404142434451 ... LastLast

Similar Threads

  1. Replies: 13
    Last Post: 05-31-2009, 08:50 AM
  2. JD Owning/Operating FAQ (Please Help)
    By Muhammad in forum John Deere Owning/Operating
    Replies: 42
    Last Post: 02-08-2009, 10:38 PM
  3. cub cadet panel repair
    By harleyizy in forum Parts/Repairs
    Replies: 8
    Last Post: 12-12-2008, 12:49 AM
  4. Pictures, Pictures
    By ddl in forum News/Feedback
    Replies: 9
    Last Post: 11-17-2001, 08:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.