RBLapham
Silver Member
A little over 2 quarts
Maybe a little late but did you try turning the K46 pulley to see if the axles moved before you took it all apart?
Did the shaft under the K46 pulley/fan look OK? several reported it stripped. Also check the keyway pins on the axle to wheels, may have broken one of them. I never took mine apart so hopefully someone else can give you a way to check the pumps.
Have youchecked the thrust bearing under the cylinder block pump? It may be cracked. Bearings are encased in nylon type housing.
A previous post - on the ground - had to run forward - reverse back and forth quickly for a bunch of times and then it started working great.
When I refilled mine I only used 2 Quarts and it is working just fine. I only drained and refilled with Syn 5-50. Yes there is a passage between the two sides. I used the flat plug and not the vent.
Since you are down under - you probably don't need to turn it over to drain:laughing: