Results 1 to 9 of 9
  1. #1
    New Member
    Join Date
    Jul 2010
    Posts
    4
    Tractor
    jubilee

    Default Ford Jubilee PTO stops when tractor is put into gear

    The brush hog stops when the tractor is put gear.

  2. #2
    Elite Member
    Join Date
    Jul 2006
    Posts
    4,409
    Location
    Northwest, WA

    Default Re: Ford Jubilee PTO stops when tractor is put into gear

    And does the mower restart back up once clutch is released and tractor starts to move ?
    ::Sent from a standard desktop keyboard::

    My Photobucket

  3. #3
    New Member
    Join Date
    Jul 2010
    Posts
    4
    Tractor
    jubilee

    Default Re: Ford Jubilee PTO stops when tractor is put into gear

    No, the mower it will stop when you get into tall grass.

  4. #4
    Veteran Member
    Join Date
    Dec 2009
    Posts
    1,895
    Location
    S. W. Virginia
    Tractor
    Kubota B3200, Ford NAA, IH 454D, Case 1845C

    Default Re: Ford Jubilee PTO stops when tractor is put into gear

    If the PTO lever is engaged and the clutch pedal is out and the PTO isn't running you have something wrong. When the mower stops in tall grass does the tractor also stop? If so your clutch is slipping. If the mower stops and the tractor keeps going something is broken in the PTO driveline. It could be the engaging coupling, shaft, or the over-running clutch if so equipped.
    Kubota B3200
    Ford NAA Jubilee
    International 454D
    Case 1845C skid steer
    JD 265

  5. #5
    New Member
    Join Date
    Jul 2010
    Posts
    4
    Tractor
    jubilee

    Default Re: Ford Jubilee PTO stops when tractor is put into gear

    The tractor keeps going. You can push in on the clutch and the mower will restart.

  6. #6
    Elite Member
    Join Date
    Jul 2006
    Posts
    4,409
    Location
    Northwest, WA

    Default Re: Ford Jubilee PTO stops when tractor is put into gear

    Slip clutch on the mower slipping ?, or a shear bolt broke ?
    ::Sent from a standard desktop keyboard::

    My Photobucket

  7. #7
    New Member
    Join Date
    Jul 2010
    Posts
    4
    Tractor
    jubilee

    Default Re: Ford Jubilee PTO stops when tractor is put into gear

    Thanks, will check it out this weekend

  8. #8
    Platinum Member
    Join Date
    Apr 2010
    Posts
    975

    Default Re: Ford Jubilee PTO stops when tractor is put into gear

    Does the PTO lever move when you press the clutch in? Does it move when you power the implement? If so the bearings in the transmission may be worn -- you don't want to think about that.

    There is a sliding coupler that connects between the transmission PTO output shaft to the actual PTO shaft. It could be worn or not getting coupled to the full extent.

    There is also a common issue with the PTO shaft bearing getting worn after 50ish years. If you go the back of the tractor (engine off), grab the pto shaft and push/pull it forward and back --> does it move? If so, the bearing is shot. Easy to fix. Park nose down a steep hill, take out the 4 bolts, then pull the pto shaft out. You may have to yank it hard to break the gasket seal. Press off the old bearing and press on a new one. Or if the splines on the shaft are buggered up, a new assembly (new shaft and bearing) is about $150.

  9. #9
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    48,575
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: Ford Jubilee PTO stops when tractor is put into gear

    hmm.. this one looks interesting...

    soundguy

Similar Threads

  1. Yanmar Specifications
    By pennwalk in forum Yanmar
    Replies: 28
    Last Post: 10-05-2011, 02:38 AM
  2. TC18 -- PTO Stops Under Load
    By Riddler in forum New Holland Owning/Operating
    Replies: 6
    Last Post: 07-15-2010, 03:38 PM
  3. Replies: 14
    Last Post: 09-06-2009, 07:23 PM
  4. Yanmar Models
    By DeltaWebmaster in forum Yanmar
    Replies: 13
    Last Post: 10-03-2008, 09:21 AM
  5. Why use clutch with GST?
    By Jay4200 in forum Kubota Owning/Operating
    Replies: 40
    Last Post: 10-09-2006, 02:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.