Results 1 to 2 of 2
  1. #1

    Join Date
    Jul 2000
    Posts
    97
    Location
    Mid West
    Tractor
    Boomer 33D

    Default Fuel Injectors

    I have a Ford 4600 SU that I will be replacing the fuel injectors on. Are there anythings I should know ahead of time? Are the injector lines pressurized when the tractor is off? Is it better to replace one injector at a time, then start the tractor?

    Thanks in advance,

    Marty

  2. #2
    Veteran Member chim's Avatar
    Join Date
    Apr 2002
    Posts
    1,881
    Location
    Lancaster County, PA
    Tractor
    Kubota L3200, Ford 1210

    Default Re: Fuel Injectors

    I had all three injectors removed from my Ford 1210 so I could take them to a bud's garage to be checked. Just the normal stuff - don't twist or kink lines, common sense items. I marked them "1,2,3" just in case. Didn't think it should make a difference, but also didn't want to tempt fate. The 1210 has a bleed screw to rid the system of air.

    The tractor hadn't been running quite right, but the injectors were OK. Problem went away after I removed the fuel tank and flushed it well.

    I'm sure one of the real mechanics here will add vital info you can use............chim

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.