Results 1 to 3 of 3
  1. #1
    Veteran Member Hooked_on_HP's Avatar
    Join Date
    Dec 2005
    Posts
    2,043
    Location
    Coal City IL
    Tractor
    Ford 1900 FWD Kubota F2100E

    Default JD 125 shid loader

    I am looking at a JD125 skid loader wit a 40hp Teledyne engine. The engine has issues. I am having a hard time finding much info on Teledyne engines. Can someone point me in the right direction.
    Bill

  2. #2
    Member
    Join Date
    Dec 2010
    Posts
    41
    Tractor
    TOO MANY, TOTAL OF 17 NOW: PRINCIPAL UNITS ARE JACOBSEN T422D & T528D & MANY JACOBSEN MORE MODELS & TORO GROUNDSMASTER 325D

    Default Re: JD 125 shid loader

    Wisconsin Motors Canada - Index Section Five

    Wisconsin Motors Canada
    Everything For WISCONSIN Engines

    Old Wisconsin Models

    This page incudes data on engine brands that were marketed in North America by Teledyne Wisconsin over the years. This includes Ducati , Robin and Ruggerini diesels and Robin gas engines.



    See attached .gif file.

    Also:

    Engine Production Dates

    Over the years we have received a number of calls from people asking what the horsepower of an older Wisconsin engine is and what year it was in production to. If you find any inaccuracies please let us know.

    Note: A letter "D" at the end of a model name signifies that this engine has a stellite exhaust valve and seat installed. Therefore an Model TH engine is the same as a THD, a Model BKN the same as a BKND, etc.

    Our thanks goes to David Swanson, a member of the AESCC as the main contributor to the list below.


    Model Bore
    x
    Stroke #
    of Cyl. Hp
    @
    rpm Year
    Intro /
    Disc'd Remarks

    A1-1/2
    2-3/4"
    x
    3-1/4"
    1
    2.4
    @
    1800
    1930
    1934
    L head,air vane gov,flywheel magneto

    A2
    3.0"
    x
    3-1/4"
    1
    3.0
    @
    1800
    1930
    1934

    A3
    3-1/4"
    x
    4.0"
    1
    5.0
    @
    1800
    1930
    1934

    A4
    3-1/2"
    x 4.0"
    1
    5.7
    @
    1800
    1930
    1934

    A5
    3-1/2"
    x
    4.0"
    1
    6.0
    @
    1800
    1930
    1934

    AD
    2-3/4"
    x
    3-1/4"
    1
    3.7
    @
    2400
    1933
    1941
    L head,air vane gov,outboard magneto (designed for pump mfgrs)

    AE
    3.0"
    x
    3-1/4"
    1
    4.2
    @
    2400
    1933
    1941

    AES
    3.0
    x
    3-1/4"
    1
    6.5
    @
    3200
    1933
    1941

    AC4
    2-5/8"
    x
    3-1/4"
    4
    16
    @
    2600
    1934
    1945
    1st 4 cylinder inline air cooled valve in head engine

    AF
    3-1/4"
    x
    4.0"
    1
    5.4
    @
    2000
    1935
    1941
    L head,air vane gov,outboard magneto

    AG
    3-5/8"
    x
    4.0"
    1
    6.1
    @
    2000
    1935
    1941
    L head,air vane gov,outboard magneto

    AH
    3-5/8" x
    4.0"
    1
    8.0
    @
    2200
    1935
    1941

    AA
    2-1/4" x
    2-3/4"
    1
    1.8
    @
    2600
    1936
    1949
    L head,air vane gov,outboard magneto

    AB
    2-1/2" x
    2-3/4"
    1
    3.0
    @
    2600
    1936
    1949

    AM4
    3-1/4"
    x
    4.0"
    4
    28.0
    @
    2200
    1938
    1944
    4 cyl valve in head, part of AC4 family but more hp

    AP4
    3-1/2"
    x
    4.0"
    4
    31.0
    @
    2200
    1938
    1944

    AK
    2-7/8"
    x
    2-3/4"
    1
    4.1
    @
    2400
    1939
    1955
    Addition to AA & AB family

    VD4
    2-3/4"
    x
    3-1/4"
    4
    16.0
    @
    2600
    1940
    ?
    4 cyl, L head,v type

    VE4D
    3.0"
    x
    3-1/4"
    4
    21.5
    @
    2400
    1940
    1969

    VF4D
    3-1/4""
    x
    3-1/4"
    4
    25.0
    @
    2400
    1940
    1976

    ADH
    2-3/4"
    x
    3-1/4"
    1
    4.5
    @
    2200
    1941
    1949
    L head, mechanical gov, outboard
    magneto,
    replaces AD,AE,AF,
    AG & AH

    AEH
    3.0
    x
    3-1/4"
    1
    5.9
    @
    2200
    1941
    1949

    AFH
    3-1/4" x
    4.0"
    1
    7.2
    @
    2200
    1941
    1957

    AGH
    3-1/2"
    x
    4.0"
    1
    8.4
    @
    2200
    1941
    1957

    AHH
    3-5/8"
    x
    4.0"
    1
    9.2
    @
    2200
    1941
    1957

    VM4
    3-1/4"
    x
    4.0"
    4
    27.0
    @
    2200
    1944
    1953
    4 cyl, L head, v-type, replaces
    AM4 & AP4

    VP4
    3-1/2"
    x
    4.0"
    4
    31.0
    @
    2200
    1944
    1953

    TE
    3.0
    x
    3-1/4"
    2
    11.2
    @
    2600
    1946
    1957
    2 cyl, L head addition to VE4 & VF4 family
    (same blocks, pistons & rods)

    TF
    3-1/4"
    x
    3-1/4"
    2
    14.6
    @
    2600
    1946
    1957

    ABN
    2-1/2"
    x
    2-3/4"
    1
    4.6
    @
    3600
    1949
    1955
    L head, higher compression ratio, (replaces AB & AK), to keep pace with improved fuels,. AA obsoleted.

    AKN
    2-7/8"
    x
    2-3/4"
    1
    6.2
    @
    3600
    1949
    1955

    AEN
    3.0"
    x
    3-1/4"
    1
    8.2
    @
    3600
    1949
    1957
    higher rpm, increased power (replaces AEH. ADH now obsoleted.

    VG4D
    3-1/2"
    x
    4.0"
    4
    37.0
    @
    2400
    1953
    4 cyl, L head, v-type. Improved on VP4. VM4 now obsoleted.

    VR4D
    4-1/4"
    x
    4-1/2"
    4
    56.5
    @
    2200
    1953
    1960
    4 cyl, L head, v-type for increased hp

    ACN
    2-5/8"
    x
    2-3/4"
    1
    6.0
    @
    3600
    1955
    1983
    replaces ABN and AKN for greater hp

    BKN
    2-7/8"
    x
    2-3/4"
    1
    7.0
    @
    3600
    1955
    1996

    VH4D
    3-1/4" x
    3-1/4"
    4
    30.0
    @
    2800
    1956
    present
    4 cyl, even firing addition to VE4D &VF4D family

    AGND
    3-1/2" x
    4.0"
    1
    12.5
    @
    3200
    1957
    1991
    replaces AFH & AGH obsoleted.

    AENLD
    3.0"
    x
    3-1/4"
    1
    9.2
    @
    3600
    1957
    present
    replaces AEN for more hp

    THD
    3-1/4"
    x
    3-1/4"
    2
    16.8
    @
    3600
    1957
    1976
    2 cyl replaces TF & TE obsoleted.

    V460D
    3-1/2"
    x
    4.0"
    4
    60.5
    @
    3600
    1960
    1970
    4 cyl, v-type, OHV, replaces VR4D, replaced by V461D

    V461D
    3-1/2"
    x
    4.0"
    4
    60.5
    @
    3600
    1960
    1970
    4 cyl, v-type, OHV, replaces V460D

    S7D
    3.0"
    x
    2-5/8"
    1
    7.2
    @
    3600
    1962
    1974
    simplified construction for better cost advantage

    S8D
    3-1/8"
    x
    2-5/8"
    1
    8.2
    @
    3600
    1963
    1991
    Addition to S7D family for more hp.

    S10D
    3-1/4" x
    3.0"
    1
    10.5
    @
    3600
    1963
    1976
    simplified construction for better cost advantage

    S12D
    3-1/2"
    x
    3.0"
    1
    12.5
    @
    3600
    1964
    1991
    Addition to S10D family for more hp.

    TRA10D
    3-1/8" x
    2-5/8"
    1
    10.1
    @
    3600
    1964
    1976
    Originally designed for tractor applications

    V465D
    3-3/4" x
    4.0"
    4
    65.9
    @
    3000
    1967
    present
    Addition to V461D family, OHV

    TRA12D
    3-1/2"
    x
    2-7/8"
    1
    12.0
    @
    3600
    1968
    1991
    Addition to TRA10D family for more hp.

    S14D
    3-3/4"
    x
    3.0"
    1
    14.1
    @
    3600
    1968
    1991
    Addition to S10D & S12D family, more hp.

    TJD*
    3-1/4"
    x
    3.0"
    2

    18.2
    @
    3600
    1968
    2001
    2 cyl with firing order changed for smoother running, replaces THD

    W4-1770
    3-1/4"
    x
    3-1/4"
    4
    35.0
    @
    3000

    current
    variation of 30 hp VH4D, uses many common parts

    W2-1230
    3.75"
    x
    3.4"
    2
    25.0
    @
    3600
    ?
    1986
    L head, v-twin

    W2-1235
    3.75"
    x
    3.4"
    2
    26.0
    @
    3600
    ?
    1988
    L head, v-twin

    W2-1250
    3.75"
    x
    3.4"
    2
    30.0
    @
    3600
    ?
    1995
    L head, v-twin


    * The THD is back in production in 2001 to replace the TJD engine, the horsepower was upgraded to match the TJD engine at 18.2 at 3600 rpm. The"D" at the end of a model # means is has stellite valves and seats. E.g. model VE4 and VE4D.

    ALSO:

    Wisconsin Motors Canada
    Everything For WISCONSIN Engines

    Old Wisconsin Engine Specification Numbers

    We are slowly compiling a list of old Wisconsin engine specification numbers and detailing what ever basic information we can find on each model which you can use as a quick reference guide. We cannot guarantee the accuracy of this information.



    AENLD 9.2 hp
    Engines

    407147 Tennant-Quincy repl, 408032 clutch take off assy, 408049 6.00:1 clutch red, 408053 standard with recoil start, 408054 Gorman Rupp repl, 408093 6.00:1 gr assy, 408241 clutch cs, less clutch assy, 408478 suitable for red. with cs # CA48D2S1, 408525, standard with starter only, 408528 standard with es and fwa, 408648 6.00:1 clutch red, 408658 all electric fuel pump, radio shielded ignition, 408668 Thermo King repl., 408662 Fairmont repl,408667 Ditch Witch repl.,408733 Fairmont repl.,408982 Gilson repl.,409723 clutch red. cs, 12v es, 10a fwa, 409724 Wacker repl, 409727 6.00:1 red., 410521 Howard Rotovator, 410576 has CA48D11S1 threaded waterpump cs, 412403 2.076:1 gr assy, 416528 Marlow pump repl.,420135 clutch cs, 12v es, 10a fwa,

    Long Block Assemblies
    SB372744 std cs, SB372745 clutch cs, SB411773 Thermo-King

    AGND 12.5 hp
    Engines
    148793 standard with hand crank, 300454 sander repl., 322507 Selma repl., 347296 Yazoo repl., 385567 Charles Machine (Ditchwitch) repl., 396481 clyutch cs, 12v es, 396700 Power Curbers repl., 396943 clutch cs, 12v es, 414084 red. cs, 12v es


    BKN(D) 7.0 hp
    Engines
    276433 uses CA51A97S1 cs, 406996 3:25:1 gear reduction assy, 407013 2.29:1 gr assy, 407184 Gilson repl, 407194 6.00:1 gr assy, 407251 5.50:1 gr assy, 407258 standard with es, 407352 Peabody Barnes repl, 407355 Quincy repl, 408040 Gilson repl, 408043 Gorman Rupp repl, 408655 Prime Mover repl
    409144 standard with recoil start, 409473 Fairmont repl

    S8D 8.0 hp
    Engines
    406931 2.92:1 gr assy, 407085 Gorman Rupp repl, 408037 Wacker repl, 408477 Bolens repl, 410303 Fairmont repl, 411655 standard with recoil start
    S14D 14.0 hp
    400303 Bolens repl.
    407515 6.00:1 clutch red.
    408202 standard with es
    408769 6.00:1 clutch red.
    409131 standard with recoil starter
    410380 standard, 12v es, 25a fwa
    412246 clutch cs, 12v es
    412915 4.06:1 clutch red., 12v es
    416866 Kut Kwik repl.
    417249 standard 12v es, fuel pump
    428050 Power Curbers repl. TRA12D 12.0 hp
    336913 Bolens repl.
    396284 standard 1" dia. keyed cs
    407823 standard with recoil start
    408732 Fairmont repl.
    416788 generator tapered shaft engine with CA84017S1 cs
    434803 2.92:1 gr assy
    TJD 18,2 hp
    310460 Mott Mower repl.
    311888 Tennant repl.
    313081 Howard Rotovator repl.
    317495 Davis repl.
    320621 3.84:1 gr assy
    320846 clutch cs, 12v es, 30a fwa
    321389 Power unit, 12v es, 30a fwa321963 same as 321389 but includes clutch
    322328 same as 320846 but less clutch
    322364 standard cs, 12v starter only
    322512 same as 321963 less clutch322522 Getman repl.
    35307 Hobart repl.
    326467 Fox Spreader repl.
    327756 Sander engine
    328209 Oil Field engine
    329539 Power Unit, 3.79:1 clutch red. assy
    332613 Swensen repl.
    338314 Selma repl.
    342765 Kalamazoo repl.
    358822 standardm, less es
    363752 Ditch Witch repl.
    367231 Yazoo repl.
    370711 standard, less tank, 12v, 30a chg
    3376805 Thomas skid steer, std keyed cs
    390992 New Holland repl.
    396936 Waterpump cs CA86-10S1
    408843 Schwarze repl.
    412848 Cardox repl.
    422756 Air Sweep repl.
    448158 standard cs, 12v, 30a, ssi
    456387smt, cto, 12v es, 30a chg, ssi
    443801SB standard cs long block assy
    443803SB clutch cs lonh block assy
    443805SB Hobart long block assy
    443807SB Charles Machine long block assy
    454412 SB Randall Sprayer long block assy VH4D
    245738 Kohler repl
    307232 Hyster repl
    309333 Davis repl,12v es, magneto ignition
    319536 Thomas repl
    319623 Power Unit CTO,12v es, 30a fwa
    319755 CA71A30S1 cs with WW69D pto
    319903 CTO, 12v es, 30a fwa
    322724 Zamboni repl
    323546 Hogg & Davis repl
    323726 Hahn repl
    341737 Int. Harvestor/Massey Ferguson repl
    342940 Case repl
    344484 CA71A119S1 pump shaft
    349421 3.79:1 clutch red, 12v es, 30a fwa
    356572 Davis repl
    358546 IH Loader repl
    358974 Owatonna repl
    359792 same as 319903 less clutch
    361435 Power Unit, 12v es, 30a fwa
    383030 Vermeer repl
    389478 Power Unit, clutch red.
    391239 Gorman Rupp repl
    396480 Target Saw repl
    398499 Snorkel repl
    402763 Gehl repl
    410050 Melroe 610 repl
    410453 Ditch Witch repl
    410787 Charles AMchine repl
    415666 Melroe 630 or 730 repl
    421995 Davis repl
    423465 JLG repl
    427399 Midmark repl
    435688 Standard with external belt driven alt.
    447903 Skyjack repl with LPG
    448159Standard, 12v es, 30a fwa, less tank
    448160 asa bove with smt
    448161 Melroe 610 repl with ssi
    448367 Melroe 70 and 720 repl
    448537 New Holland repl
    453097 Skyjack repl, gasoline
    441817SB standard cs long block assy
    441819SB clutch cs long block assy
    441821SB Charles Machine long block assy
    441823SB Melroe long block assy
    457837SB Charles Machine long block assy
    VG4D
    320140 Power Unit, suits clutch
    321151 Power unit, 12v es, 30a fwa
    321727 Owatonna 1737 repl
    329139 Ditch Witch repl
    338608 Davis repl
    343756 Case repl
    356571 Davis repl
    358973 Deere repl
    364008 Thomas repl
    364303 Suits clutch, 12v es, 25a fwa
    364320 IH repl
    370718 New Holland repl
    395062 Fulton MAnlift repl
    395854 New Holland repl
    401514 3.60:1 clutch red
    402531 C,H & E repl
    410468 Target Saw repl
    431308 Chipmore repl
    431465 New Holland repl
    448162 Standard, 12v es, 30a fwa, ssi
    448471 Power Unit, CVTO, 12v es, 30a fwa
    444689SB standard cs long block assy
    444691SB clucth cs long block assy
    450046SB Charles Machine long block assy V465D
    404874 2.77:1 clutch red
    404960 New Holland repl
    406110 Ditch Witch repl
    406605 Vermeer repl
    40671 Target Saw repl
    406975 Davis repl
    406992 CTO assy
    407097 Standard to accept hydraulic pump
    407483 suits CTO
    407757 same as 406992 less clutch
    407759 Standard engine
    407765 CTO assy
    408105 CA75C5S1 cs with WW165 housing
    411042 Swather repl
    411378 Standard, HDAC to accept K106D hyd. pump
    411653 Rivinius repl
    413514 Standard with K106D hyd. pump
    416857 Asplundt repl
    429572 Standard with LPG
    433755 Falcon pump repl
    446183 Target Saw repl
    448163 Standard and Vermeer repl
    444693SB Standard cs long block assy
    444694SB Clutch cs long block assy
    448273SB Charles Machine long block assy
    W2-880
    426597 standard, 12v es, 30 chg, cto
    426598 standard, 12v es, 10a chg
    426599 standard, 12v es, 30a chg
    430226 CA69GS2 cs
    432397 standard es
    439001 standard, es, hdac W2-1250 25 hp
    449551 standard , 12v es,30a fwa, ssi
    449903 standard, 12v es, 30a fwa, ssi
    451631 standard, 12v es, 30a fwa, ssi, cto
    451729 generator cs, WW188A
    456060 standard,12v es, 30a fwa, hdac, single outlet exhaust manifold
    W4-1770
    421402 Ditch Witch repl.
    429558 Hahn repl.
    431476 Fairmont repl.
    4318987 cto, 12v chg, 30a fwa
    449013 standard 12v es, 30a chg, ssi
    449192 standard, external alt, dry a/c assy, ssi
    450421 Target saw repl.
    SB448386 standard cs long block assy
    SB448388 cto long block assy
    SB451876 concrete saw long block assy


    List of Abbreviations
    assy - assembly
    chg - charging system
    cto - clutch take off
    cs - crankshaft
    es - electric starter
    fwa - flywheel alternator (stator under flywheel)
    gr - gear reduction
    hdac - heavy duty air cleaner
    long block - same as Briggs short blocks but also comes with cylinder head
    LPG-propane equipped
    red - reduction
    repl - replacement engine
    smt - side mount fuel atnk
    ssi - solid state distributor
    std-standard
    Attached Thumbnails Attached Thumbnails -wspecoldmodels-gif  

  3. #3
    Member
    Join Date
    Dec 2010
    Posts
    41
    Tractor
    TOO MANY, TOTAL OF 17 NOW: PRINCIPAL UNITS ARE JACOBSEN T422D & T528D & MANY JACOBSEN MORE MODELS & TORO GROUNDSMASTER 325D

    Default Re: JD 125 shid loader

    There is a guy over on www.MyTractorForum.com and goes by the online handle of:
    .
    mikeemc
    .
    "...have a low hour Wisconsin engine out of my Frontline. Would like to get 600 for it with all the wire harness in tact with insturments."
    "...parted out the machine and was saveing the engine for another project. it's the 3cyl wisconsin robin /teldyne 3000 series. 33hp. "
    .
    There is another guy over on www.MyTractorForum.com and goes by the online handle of:
    .
    Pyrodex76.

    "....have the 3 cylinder Teledyne gas motor. I also have the book on the motor. I have a service manual for models manufactured from 1980-1984 gas and diesel. If anyone has questions I would be glad to help."
    .
    "Head Gasket for Teledyne WL3-1000 is part number EY242 16101 01. I have an illustrated parts catalog for these motors. These are a 3 cylinder Wisconsin Robin Motor rated 33HP."
    .
    Some othe stuff I pulled off the site:
    .
    ShopJacobsen.com - The Official Online Store for Jacobsen Parts

    http://products.jacobsen.com/img/manuals/832191.pdf

    .....tried many different stealerships and the one I've found to be best is Wilfred MacDonald down in Jersey their number is 888-831-0911. All you need is the model number of your machine.


    Also Lawn Mower Parts, Inc. of Belmawr, New Jersey is a well established engine dealer who does miricles. Just need engine info,
    .
    3 cylinder Teledyne gas motor

    teledyne wl3-1000 3 cylinder gas engine

    Teledyne Continental motor parts to keep your engine running smoothly

    Teledyne Continental engines were widely used by major manufacturers for domestic and industrial use, but now the company focus has shifted to aircraft. If you are looking for Continental motor parts that are not aircraft related, call Mid-America Power Center at 800-328-0916 for expert advice and fast shipment of the parts you need.

    Teledyne Total Power W41770 W41770-449013
    .

Similar Threads

  1. JD 563 Farm Loader
    By Back40Bob in forum Buying/Pricing/Comparisons
    Replies: 7
    Last Post: 12-21-2009, 01:04 AM
  2. JD 553 loader
    By stravis in forum John Deere Owning/Operating
    Replies: 1
    Last Post: 09-05-2009, 08:21 PM
  3. JD 640 loader skidsteer possibility
    By Maka in forum John Deere Owning/Operating
    Replies: 2
    Last Post: 02-01-2007, 02:53 PM
  4. Ballast Ballast
    By JDGREEN4ME in forum John Deere Owning/Operating
    Replies: 6
    Last Post: 10-17-2002, 11:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.