mike194
Silver Member
I was changing the oil on my Agco St30x which is the same tractor as the Massey 1428v and i noticed that 6 out of the 8 rearward bolts that hold the loader bracket on were loose. i tried to tighten them but the threads were pulled out. they are into the casting of the tractor , i am not sure why the threads would be pulled out i am pretty easy on it.
the bolts were 12 mm and i redrilled the holes and tapped them at 14mm. and all seemed to work well.
just thought i would post this in case someone had a similar issue. i know TBN has help me fix other things also.
the bolts were 12 mm and i redrilled the holes and tapped them at 14mm. and all seemed to work well.
just thought i would post this in case someone had a similar issue. i know TBN has help me fix other things also.