john deere 4310 repair manual

[jgraf]

Is there a sight where I can download or look at a repair manual for my tractor free?

thanks Jim

 

[JB4310]

I have a 4310 as well, I think they protect that stuff pretty closely.
I've heard you can get it on CD but very costly.

JB.

 

[RoyJackson]

As that is copyrighted material, I doubt you find any manual online...doubt the TBN mods would even allow such a link.
If you are specific about what you need, someone may attach a page or copy/paste the manual's text in a response.

If you go to your local Deere dealer, I'm sure they'll let you look at a manual.

As far as cost of buying one...I thought the CD-ROM versions weren't too expensive ($50-$70). The paper copies are well over $100. However, I could be wrong since I haven't had to purchase manual in several years.

 

[jgraf]

Thanks for the reply.
I bent the tye rod and can not get those bolts with the grease fitting on top out that hold the tye rod. If I couls see a drawing of how it goes together maybe I could get it apart.

thanks Jim

 

[beenthere]

:welcome:
You can go to jdparts and with free registration, get access to all the parts and schematics for any Deere
Here is what they show for the 4310 tie rod.

 

[RoyJackson]

You might find a better illustration on JD Parts website.

 

[jgraf]

thanks for the info.
Jim

 

[beenthere]

Jim
You may need a tie rod removal tool to get the tapered tie rod end out/loose after removing the castle nut. At what stage are you now?

 

[jgraf]

I got the nuts off the rods and the big nuts on the tye rod itself are loose.
Whats a rod removal tools look like?
thanks Jim

 

[beenthere]

A wedgie. Google it and several will come up.

Might thread a nut back on and tap it back out...carefully.